MAD1108

[Tim Ressel]

Making a circuit to match is simple. Knowing what parameter to match is not
simple. Do you match diodes for V/I curves, impedance vs. current, of other?

Tim Ressel--Compliance Engineer
Hewlett-Packard
Verifone Division
916-630-2541  
tim_r1 at verifone.com                     



-----Original Message-----
From: Harry Bissell [mailto:harrybissell at prodigy.net]
Sent: Thursday, July 06, 2000 5:41 PM
To: tomg
Cc: synth-diy at node12b53.a2000.nl
Subject: Re: MAD1108


The Motorola division that made the MAD1108 is now called "ON
Semiconductor"
The division was "divested".  I think that maybe once ON gets some
distributor
agreements we might see the MAD back.

MAYBE someone needs to make a board for a CHEAP ASS component matcher.
Any takers (hehheh)

H^) harry

tomg wrote:

> Thanks...That works.
>
> Tom
>
> > "Integrated Circuits for Bally Slot Machines"
> >
> > http://www.happcontrols.com/gaming/gaming_parts/60013200.htm
> >
> > The MAD1108 is their part #60-0109-00 @ $2.07 per piece
> >
> >
> > >It's my guess that they are no longer going to carry Motorola.
> > >Anybody got a second source for the MAD1108s. I think my
> > >local supplier is a Motorola distributor and can special order
> > >small quantities but I always like to have a second source.
> > >
> > >Tom
> >
> >