triggered s&h, in phasers or modules?

[Robert H. Rickner-III]

Will this work with any LFO, ie could I add a trigger input to one LFO and
run in a S&H for wacky LFO possibilities? 

On Tue, 25 Jan 2000, Rob wrote:

> OH, BTW, I forgot a few things:
> 
> 1)you need a flanger/phaser pedal (duh!)
> 2)you have to find the LFO output and route back to the cap in the feedback
> loop (go to lepers schematics or look on the net; AFAIK, the SPEED/RATE and
> WIDTH are the ones that directly affect the LFO, start from the WIDTH which
> controls the LFO amplitude and route back until you get at that little cap)
> 3)THEN, you need gate/click/sync output from a synth or midi/cv or an
> amplified audio trigger. The output of this will trigger the LFO fet and
> cause the reset.
> 4)To sync it, you merely play a note periodically or send out a click track
> at the rate at which you want to sync to, say, 1 bar, half bar, etc
> 5)mess with the LFO rate on your pedal until you get the type of sound you
> want.. since you are retriggering the flanger, you can get some really WILD
> stuff out of it by having the LFO at various rates that dont match the
> retrigger note/click.
> 
> Ill put on some realaudio on my page and some pix of it (dying to try out my
> new camera!)
> 
> Rob
> 
> 
> ----- Original Message -----
> From: Rob <cyborg_0 at iquest.net>
> To: AH <Analogue at hyperreal.org>; Cyrus <cyrusjoaquin at my-deja.com>
> Cc: synth-diy <synth-diy at mailhost.bpa.nl>
> Sent: Tuesday, January 25, 2000 6:41 AM
> Subject: Re: triggered s&h, in phasers or modules?
> 
> 
> > Yes, there is! You just need to find the LFO on the phaser/flanger and
> find
> > a way to use a fet to reset the cap so that the sweep of the LFO can be
> > triggered. Look at the Arp odyssey docs for more info on how to do this.
> >
> > Believe me, you WILL NOT regret doing this! I have a trigger jack on my
> DOD
> > flanger pedal, and its wonderful.
> >
> >
> > Rob
> >
> > ----- Original Message -----
> > From: Cyrus <cyrusjoaquin at my-deja.com>
> > To: AH <Analogue at hyperreal.org>
> > Cc: synth-diy <synth-diy at mailhost.bpa.nl>
> > Sent: Monday, January 24, 2000 10:06 PM
> > Subject: triggered s&h, in phasers or modules?
> >
> >
> > > ---
> > > Hey,
> > > I've heard tunes where the sample-and-hold on a phaser or other
> filter/fx
> > was in time with the beat or triggered by each new note.  Can anyone tell
> me
> > how this is done?  Are there prefab fx boxes or synths that trigger each
> > step of the s&h from an external clock, or from the incoming audio?  Are
> > there modules that can be configured to do this?
> > > Thanks!
> > > Cyrus
> > >
> > >
> > >
> > >
> > >
> > > --== Sent via Deja.com http://www.deja.com/ ==--
> > > Share what you know. Learn what you don't.
> > >
> >
> >
> 
>