606 trigger mod? help....

[Rob]

Well, from what I have seen, you could just route the trigger input to a
buffer and send it out.
Rob
Oh, wait a sec.. you want it handed to you! What kinda diyer are ya! ;)

Gimme a sec..

Look on the scheme at
BD-r69
SD-R91
CH-R84
OH-r88
ht-r301
lt-r203
cy-r89

You want to take the trigger from side closest to the transistor. you want
to then run these out to an opamp to buffer it so that they dont lose volume
or fluctuate when you use the triggers, that is if you want to use the
sounds at the same time.. This is how its done for the HT and LT trigger,
but they take it from the other side of the resistor, the side away from the
transistor, straight from the processor.. All I can say is dont do it that
way if you dont have to, otherwise if something goes wrong the CPU will say
"ppoooff!".

Rob

----- Original Message -----
From: Paul Wagorn <pwagorn at pinc.com>
To: <synth-diy at mailhost.bpa.nl>
Sent: Friday, January 21, 2000 10:51 AM
Subject: 606 trigger mod? help....


>
> Does anyone have any idea how i would be able to add trigger outs to my
> 606's other instruments like the toms?
> It seems to me like a pretty easy mod, but I'm not sure where I would
start.
>
> has anyone done this?   or can anyone take a quick look at the scem & give
> me a starting point?
>
> I want to make it into a trigger monster!
>
> thanks!
>
> Paul
>
> ------------------------------------------
> music/gear/forsale/nakedsynthpics:  www.puffboy.com
> analogue heaven radio:              www.mp3.com/stations/ah
>
>