CAM lfo and wav

[--M]

    I have been working on the LFO and WAV CAM modules and had a few
questions.

   First the LFO5a. I am using transisters that I got at radioshack.
after all of those nasty rumors that Tom uses strange japanese
transisters I was being very carefull to check the pinouts and match
them to the schematic. Turns out some of them match the silkscreen and
some are backwards? The corrctions posted for this PCB said that Q2
should be reversed, I curious if this one is correct on the schematic
and reversed on the silkscreen or what.

    The WAV1b has three trimmers, does anyone have any part numbers or
know which variety to get to make sure they match the holes in the PCB.
I have the mouser catalog but can't seem to find one that matches the
dimensions on the board.

Thanks

--M