zipper noise was: digital control

[Jezz]

> If you want 14 bits of resolution why not use pairs of midi controller
> messages. Thi should work fine if you build the controller yourself. say
> for control knob 1 use cc1 and 2. this will give 14 bits. Send
> both thes to
> the sequencer and then to the synth. It will chew up twice the midi
> bandwitdh, but not necessarily.....

there is actually something in the MIDI specification about using two
controllers for high and low bytes. CC-0 to CC-31 are paired with CC-32 to
CC-63 as the high and low bytes respectively. Whether you can find any
(sequencer) software to send this data is another question...

+-------------------------------+
|     jezz at bluebear.org.uk      |
| jezz at bluebear.freeserve.co.uk |
|  http://www.bluebear.org.uk   |
| MIDI, SYNTHS, CIRCUITS, STUFF |
+-------------------------------+