Spesking of midi2cv8

[KA4HJH]

>     Ok so I got the Midi2CV working with a drum machine. Nothing seemed
>to work until I switched to midi channel 16 on the drum machine.

Did you build your own from scratch? Is the piano key switch you used 
upside down like mine? Channel 1 becomes channel 16!

>     I have a question about the 2 voice mode. When does the second note
>kick in? It seemed to me that it would only carry over when two notes
>overlap? I would like to be able to program to independant voices, is it
>possible to send midi messages that come through as voice one or 2?

If you set it to Multi mode by sending a program change #0 command, 
the first output is assigned to the base channel, the second to the 
next MIDI channel up.

>     As I was working with the midi2CV I started to think that it would
>be great if I could sync the midi signal with my LFO, any suggestions.

Who is sync'ing who?

Terry Bowman, KA4HJH
"The Mac Doctor"

ICQ: 45652354