SEQ2

[Keith Winstanley]

Capacitors 19 and 21 on the seq2 screen printing and parts list
(C16 & C18 on the overlay graphics)
(the ones either side of U13 (4001))
are quoted as being 1MF 16VDC

I am having trouble finding such a capacitor,
at 1uF the seem to start the electrolytics at about 50V,
the cans I have here are 1uF 63V, do people think this is ok.

While I am at it, it is not good practice probably but I occasionally
mix resistor wattages, I mainly use MF60 0.6W 1% Metal Film but
occasionally a 0.4W or 0.25W gets in there, I have always assumed
it will not be a problem, never has been, but are there any thoughts
on the matter?

(again forgive cross postings I have no idea which lists are working 
properly!)

TIA

Cheers....

Keith Winstanley
http://home.freeuk.net/lowpass