behringer mixingdesk modification.

[Dave Krooshof]

Thanks for the quick re:
I opened mine so far that I could see the top of the print.
No jumper, far form 'ergonomic' (and still looking for a lost screw)
setting  the marked spot would mean scratching a line on the board away and
adding a switch. I want to be a bit more sure before I start scratching.

>I've got the 2004a at home. There are two sends on mine. The first is
>switchable, the second is not. There's a jumper on the board for the second.
>When I get home in a couple days I can check what the manual sez if you'd
>like.
>
>
>Quoting Dave Krooshof <krooshof at xs4all.nl>:
>
>> In a description of the little mixingdesk I just bought, I read:
>>
>>
>http://www.axemusic.com/products/audio/mixers/audio_mixers/behringer_mx802a.htm
>> >We'll give you our support - 2 flexible aux sends.
>> >The signal routing of this super-ergonomic mixer is extraordinarily
>> flexible.
>> >Depending on your needs, aux 2 can be switched pre-/ post-fader
>> internally.
>>
>> This desk (behringer eurorack ms802a) does not have a pre/post switch!
>> On the print I did find marked spots, so my guess is that a switch was
>> inteneded but was left out for productioncosts or so. The
>> blockschematic
>> als suggests this modification is possible/intended.
>> But before I start drilling holes in my new desk, does anyone out there
>> *knows* anything about this modification?
>>
>>
>> Dave
>>
>>
>> ps: soldering is indeed "super-ergonomic" and "extraordinarily
>> flexible",
>> isn't it?
>>
>> --------------------------------------------
>> Dave Krooshof http://www.xs4all.nl/~krooshof
>> geluidstechnicus @ http://www.ahk.nl/the/theatertechniek_ov.html
>> webmaster: http://www.popronde.nl
>>
>>
>>
>
>
>
>---------------------------------------------------------------------
>David Anderson
>Web Site Admin
>Plattsburgh State University
>---------------------------------------------------------------------


--------------------------------------------
Dave Krooshof http://www.xs4all.nl/~krooshof
geluidstechnicus @ http://www.ahk.nl/the/theatertechniek_ov.html
webmaster: http://www.popronde.nl