1 V per octave Tube VCO

[patchell]

    Far out.....  One of these days, I will have to make a venture into the
Hollow State...

Ken Stone wrote:

> Have a look at http://www.blaze.net.au/~sasami/synth/ for the schematic of
> my prototype Tube VCO. This thing follows 1 volt per octave, and has a range
> of at least six octaves as drawn. It tracks my System 100M VCO perfectly.
> The initial idea for the 1V/oct came from the work of Rene Schmitz, so be
> sure to check out what he has to say on the subject too. The core was based
> on Eric Barbour's tube VCO.
>
> Yes, Harry... Tubes.
>
> Ken
> _______________________________________________________________________
> Ken Stone   sasami at blaze.net.au
> Catgirl Paradise <http://www.anime.net/~kens/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

--
 -Jim
------------------------------------------------
* Visit:http://www.silcom.com/~patchell/
*-----------------------------------------------
*If you didn't buy a home in Santa Barbara,
* You didn't pay enough!
------------------------------------------------