Four Quadrant Multipliers

[patchell]

    Sure hope Jameco isn't out of them right now.  Their web site does not
indicate if the parts are in stock or not :-(

    I went to the Analog Devices website.  You can purchase them direct....if
you purchase 100 of them (they only cost about $4 each), but, I don't know what
I would do with 100 of these little suckers (besides not having $400 to spend on
them).

    Thanks to everybody for the other suggestions.  I will look into them.



Scott Bernardi wrote:

> Multipliers seem hard to come by these days.  I was looking all over for the
> AD633 (Jameco was out at the time).
> You might try the Intersil ICL8013, but they're not much cheaper.
>
> patchell wrote:
>
> >     I just ordered some AD633's from Jameco toady, and was a bit shocked
> > to see that they raised the price on these from $10 each to $12 each
> > (Jameco will not be restocking these when their stock on hand runs out).
> >
> >     Does anybody know if Burr Brown (or anybody else for that matter)
> > has a similar product to the 633 (that is, basically ready to plug into
> > the circuit, with a bare minimum of external components) that is as
> > cheap, or better yet, cheaper?
> >
> > --
> >  -Jim
> > ------------------------------------------------
> > * Visit:http://www.silcom.com/~patchell/
> > *-----------------------------------------------
> > *If you didn't buy a home in Santa Barbara,
> > * You didn't pay enough!
> > ------------------------------------------------
>
> --
> Scott Bernardi
> sbernardi at home.net

--
 -Jim
------------------------------------------------
* Visit:http://www.silcom.com/~patchell/
*-----------------------------------------------
*If you didn't buy a home in Santa Barbara,
* You didn't pay enough!
------------------------------------------------