[EFM] Re: Boards for Christmas

[tomg]

One more thing the RXCV-Pro shown on the SBM
is *NOT* included with the SBM. It is a separate
purchase.... Just thought I would mention that..;-)

Tom


> Here are the few links I have now.
> 
> Midi-GATE Page
> http://www.xavax.com/efm/products/midi-gate.html
> 
> RXCV-Pro(2) Page
> 
> http://www.xavax.com/efm/products/rx-cv2.html
> 
> MadMouse Pro - Layout drawing
> 
> http://www.xavax.com/efm/products/pics/madmousepro.gif
> 
> SBM - 6r Panel Drawing
> 
> http://www.xavax.com/efm/products/pics/sbm-6r.gif
> 
> SBM PCB Overlay.
> 
> http://www.xavax.com/efm/products/pics/sbm-pcb-ol.gif
> 
> Tom
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ----- Original Message ----- 
> From: "tomg" <efm3 at mediaone.net>
> To: <synth-diy at node12b53.a2000.nl>
> Cc: <efm at xavax.com>
> Sent: Tuesday, December 05, 2000 4:06 AM
> Subject: Boards for Christmas
> 
> 
> > Ok guys, I ain't Santa but you can get a few Christmas
> > goodies from me. There are 25 of each board to be
> > had. I still don't have anything on line but I promised I
> > would take orders today. So I'm taking orders...;-)
> > 
> > Midi-GATE  - Midi-note to Gate converter. Converts
> > 16 midi notes to 16 separate 0-5V gates. Multiple Midi-
> > Gates may be stacked on the same channel and mapped
> > key for key to another keyboard. The pcb is 3X4 has pcb 
> > mounted midi-jacks (in & thru) , set & dip select-switches 
> > and a 3.5mm AC power jack. It has a on-board +5V power 
> > supply. It requires a 200ma 12VAC wall transformer or may 
> > be run from any good +5VDC source capable of an additional 
> > 200ma load. 3X4 pcb (pcb and PIC $40) 
> > 
> > RXCV-Pro - High quality Pic based midi-cv converter
> > Features Key-CV, PB-CV, Mod-CV, Vel-CV, 
> > Key-Gate and Glide-Gate (any two keys). It has pcb 
> > mounted midi-jacks, a on-board +/- 12 ,5V power supply. 
> > It requires a 500ma 12VAC wall transformer or may be 
> > run from any good modular source capable of an additional 
> > 300-400ma load. 3X4 pcb (pcb and PIC $50) 
> > 
> > MadMouse-Pro - Basically a MS-20 stuffed into a
> > 7.5 X 4.3 X 2.4 cast aluminum box. Features a high quality 
> > midi-cv converter. Key,PB,Mod CV Glide and Key Gate. 
> > 2 saw/sq VCOs w/sync, 1 ms10 style LFO, 2 VCAs (mod 
> > and final), 1 LP 2 pole S&K VCF (ms20), 2 AD(R) egs. A 
> > synth in a stompbox. It has a on-board +/- 12 ,5V power 
> > supply and requires a 500ma 12VAC wall transformer 
> > ( pcb and PIC $60) 6.5 X 4 pcb. (It's so flippin cute!)
> > 
> > SBM (single board modular) It's basically everything I 
> > could stuff on a 6.5X9 pcb. 22 modules for $60 thats
> > $2.72 a module....for the board anyway..;-). (pcb $60) 
> > 
> > Power Supply (+/-12 at 1.5A)
> > 1 buffer
> > 1 lag circuit w/fet switching
> > 2 MiniMoog (vco4) type oscillators saw/sq/tri/sine
> > 2 Serge Waveshapers
> > 1 Advanced series Moog 4P VCF w/vc q
> > 2 13600 VCAs w/cc and dc io
> > 4 Mixers w/non and inv outs
> > 2 Independent-Gate ADSRs w/non and inv outs
> > 1 MS20 sample & hold
> > 1 MS20 pink/white noise
> > 2 MS10 LFOs
> > 1 4013 Sub octave, /2 /4
> > 1 4011 Ring Mod
> > 1 74LS93 Staircase gen
> > 
> > There should be something online by the end of the 
> > week. I should ship the 23rd. Merry Christmas.
> > 
> > Tom
> > 
> > 
> > 
>