synthacon >>WARNING<<

[M.Ruberto]

hi guys,

uh, i hope you haven't whipped out your soldering irons yet. it appears i made
a big boo boo. take your copy of the schematic and trash it. i am redrawing it
right now. if it's ok with Romeo i'll fax him the corrected version tomorrow.
the 2 .002 uf caps coming off the diode ladder/ring should be connected to the
1.5 uf cap coming from the bandpass tap on the selector switch and these to a
1K resistor connected to the positive side of the 10 uf sig. out cap. the
switch contacts are as per my drawing HP, BP, LP from top to bottom. this
particular node should only have connections to the positive side of the 1.5
uf cap and the 2 .002 uf caps from the ladder and the 1K resistor, nothing
else. also, on my drawing there are 2 resistors in parallel, a 1.2K and a 12K.
these may not be the right values. the first color band is faded to an
indeterminant color. i measured exactly 2K across these piggy backed
resistors. 

i'll keep looking for more errors and finish redrawing when i'm satisfied
there are no more. sorry guys!

i'll keep you posted.

-<mike>-

____________________________________________________________________
Get free email and a permanent address at http://www.netaddress.com/?N=1