SCI Pro-One question

[Goddard, Duncan]

I'll have a look at mine when I get home tonight, though I suspect you'll
find it's associated with the little cpu.... rather than the eg's, that is.

d.

> ----------
> From: 	Greg Montalbano[SMTP:Greg.Montalbano at ucop.edu]
> Sent: 	28 August 2000 16:32
> To: 	synth-diy at node12b53.a2000.nl
> Subject: 	SCI Pro-One question
> 
> Noticed that the "retrigger" switch on my Pro-One wasn't working --
> happened to have the schematics out (from building the filter clone) and
> went blind trying to locate that switch -- it appears as S128 on the page
> that shows the circuit board artwork, but I'm damned if I can find it on
> the schematic.  Any help, here?
> 
> (of course, I could just be losing my mind...)
> 


***************************************************************************
CONFIDENTIALITY NOTICE

The contents of this e-mail are confidential to the ordinary user
of the e-mail address to which it was addressed, and may also
be privileged.  If you are not the addressee of this e-mail you may 
not copy, forward, disclose or otherwise use it or any part of it
in any form whatsoever.
If you have received this e-mail in error, please e-mail the sender
by replying to this message.

MTV Networks Europe
*****************************************************************************