amperes

[Hairy Harry]

If you get really hungry (thirsty?) check out the
+/- 15V power supply from Marlin P. Jones (MPJA.com)
Part number 12286-PS  its a 1.5A output each, with a
line cord and fuses. A steal for $19.95, but shipping
on the 7lbs will cost 'ya...

H^) harry


>From: John E Blacet <blacet at monitor.net>
>Reply-To: blacet at monitor.net
>To: matti at devo.com
>CC: synth-diy <synth-diy at node12b53.a2000.nl>
>Subject: Re: amperes
>Date: Mon, 21 Aug 2000 07:35:56 +0000
>
>I must chime in here to mention that the Blacet and Paia 200 mA supplies
>are not the same. The Paia supply is actually +15V @100 mA and -15V @
>100mA; the Blacet unit is +15V @ 200 mA, -15V @ 200 mA.
>
>As for how many modules these will run; Blacet modules are *averaging*
>35 mA on the plus side. (It is pretty typical to just look at the plus
>side because the minus side is usually less.) But you really have to add
>up the modules you buy.
>
>In either case, 100 or 200 mA is not very much once you get 5 or 6
>modules going. In fact, the PS200 is going away soon to be replaced by a
>800 to 1000 mA unit. We will no doubt have a smaller unit for
>*starter* systems also.
>--
>
>Regards.
>-------------------------
>John Blacet
>Blacet Research Music Electronics
>http://www.blacet.com
>-------------------------
>blacet at monitor.net
>-------------------------
>Are you on our mailing list?
>http://www.blacet.com/mailform2.html

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com