amperes

[John E Blacet]

I must chime in here to mention that the Blacet and Paia 200 mA supplies
are not the same. The Paia supply is actually +15V @100 mA and -15V @
100mA; the Blacet unit is +15V @ 200 mA, -15V @ 200 mA.

As for how many modules these will run; Blacet modules are *averaging*
35 mA on the plus side. (It is pretty typical to just look at the plus
side because the minus side is usually less.) But you really have to add
up the modules you buy.

In either case, 100 or 200 mA is not very much once you get 5 or 6
modules going. In fact, the PS200 is going away soon to be replaced by a
800 to 1000 mA unit. We will no doubt have a smaller unit for 
*starter* systems also.
-- 

Regards.
-------------------------
John Blacet
Blacet Research Music Electronics
http://www.blacet.com
-------------------------
blacet at monitor.net
-------------------------
Are you on our mailing list?
http://www.blacet.com/mailform2.html