AW: My Midi controlled VCF module

[Ullrich Peter]

Hallo!

Your idea sounds very nice!

>I will use an Atmel AT89C52 microcontroller, with an AD7945 12 bit DAC that is also 
>used for AD for the pots. (SAR principle). The uC >has 8K flash memory, and needs 
>no support logic.

I would recommend to use the 89S8252 as this part is easy to upgrade inside your 
circuit and is easy to program even without a special programmer by the means of the 
parallel port of a PC. Another advantage is that this part also has 2kB EEPROM inside
so the selected MIDI-receive channel can be stored and also the last settings if you want.

Which programming language will you use? PLM, C, PASCAL, ASSEMBLER?

Ciao
Peter

        \|/
       (o o)
--oOOO--(_)--OOOo------------------------------------------------------
                   Ing. Peter Ullrich         mailto:ullrich at kapsch.net
                   Homepage: http://come.to/ullrich    or the full link
                   http://www.geocities.com/SiliconValley/Heights/3586/
                   Hardware & Software Developer /  Electronic Musician
   .oooO           KAPSCH AG / ECCN                    Vienna / Austria
   (   )   Oooo.            Traffic Control and Transmission Technology
----\ (----(   )-------------------------------------------------------
     \_)    ) /
           (_/