Soldering irons was: Re: New to list

[Theo]

I'am not 100% sure but try a bit for Ersa TIP260 or else for Ersa
MS250/multitip25.
There are cheap Altai replacements for the TIP260,
but they don't deserve the name "long live" bit.

Hope this helps,
Cheers Theo

----- Original Message -----
From: Hallgeir Helland <hhelland at mailandnews.com>
To: DIY <synth-diy at node12b53.a2000.nl>
Sent: Saturday, April 29, 2000 1:40 PM
Subject: Soldering irons was: Re: New to list


> Hi all,
>
> I have a nice regulated soldering iron, brand OK Industries.
> But the tip is totally worn away (only a little bump left)
> and I can't find a new one, anywhere.
>
> If someone knows where to get these, or have some,
> would you please (pretty please...) tell me, so that
> I do not have to buy a whole new soldering station.
>
> The tip's base is hollow and the heater sits inside it.
> It's 30mm long, 8.5mm outer diameter and 5mm inner diameter.
>
> thanks a lot,
> Hallgeir
>
> BTW here in SW Norway summer has hit big-time!!
> --
> HELLAND MUSIKK TEKNOLOGI
> -=  Hallgeir Helland  =-
> hhelland at mailandnews.com
>