Paia FatMan HELP!

[BonoVox9 at aol.com]

In a message dated 4/23/00 8:07:09 PM Central Daylight Time, 
thescum at surfree.com writes:

<< It sounds like you got the terminals on the pots confused when you wired
 them.  I don't remember how John's instructions are written, but somewhere
 he probably explains how he was counting them when he wrote the
 instructions, you should probably take a closer look at that section.
 Numbering pot lugs can be a little tricky, because there are several ways
 you could hold a pot, and start counting
 
 ...but if you're hearing things, even if they respond backwards, that's a
 very good sign!
 
 The solution would be to swap the connections on each of the pots...the
 center of the 3 will still be OK, but the left and right terminals will need
 to be traded...and if there are any that bridge the center to the left or
 right, the bridge will also need to be swapped.
 
 You might try this on the volume pot, to verify that that fixes the problem,
 before moving on to any others.
 
 Byron Jacquot >>


Well, that is a good suggestion, but, I already went back and compared my 
wiring to the manual, and everything is the way it is supposed to be. I don't 
know if it was a mistake in the new desktop case supplement, or what. I'm 
confused. I really don't want to take all of that apart again. It's so small 
in that case.
j