tips on soldersucking

[John Speth]

> -----Original Message-----
> > At 03:33 PM 4/13/00 -0400, mark scetta wrote:
> > >how do y'all do your desoldering, without damaging components?
> >
> > I'm probably the only one to do this- as most of my work is 
> with larger,
> > rather non-sensitive components, but I use compressed air- 
> I heat the
> > solder and blow it out. By the time it hits something else, 
> it has cooled.
> > ________
> >
> > Chris Bryant
> > Bryant RV Services
> > DeLand, Florida
> > mailto:bryantrv at totcon.com
> >
> 

Remember to where goggles if you're gonna blast it out - Ever get a solder
blob in your eye?  It hurts.

John Speth
Molectron Detector, Inc.
http://www.molectron.com
mailto:johns at molectron.com 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://synth-diy.org/pipermail/synth-diy/attachments/20000414/1856dff2/attachment.htm>