[EFM] You got a brand new pair of roller skates...

[tomg]

You could just lower those 10K resistors. But once you've
heard it go there you will want to go back again..I did 
anyway.

Tom


> ACTUALLY I just stumbled into a really nice VCF8e mod... and so easy
> (I'm pissed i've been working for days... Just solder one red LED across
> the 33K resistor
> in the GAIN stage OTA (resonance). I prefer Cathode to ground polarity.
> Gives
> Asymmetrical limiting if you crank hard, and inproves the input dynamic
> range. I can go up to 2-3 volts without totally killing the res....
> 
> Works better than the three diodes and the diode breakpoint circuit, and
> fits on the
> board !!!
> 
> H^)
> 
> tomg wrote:
> 
> > > I got a Sallen-Key...
> >
> > You're going to get another too!  Stop trying to fix those things or
> > you'll go batty!! They are naturally nasty and they like it that way.
> > Try to keep the res pot settings low or you might start playing
> > acid Harry!.....;-)
> >
> > The new...uh...ah....damm....VCF12..4P s&k...2040 sounding
> > all 13600 thing is comming it's exactly what you want. Might be
> > what a lot of people want...;-)  It's very very smooth .....I'm a
> > horriable tease sometimes...
> >
> > Tom
> >
>