DIY PCB etching

[Theo]

You impress me, never got that kind of result.
Have to admid that I used plain paper with transparent 21 spray at the time
(about 10 years ago).
With a DIY uv kit, the results improved to useable, not perfect.

 Cheers Theo.


----- Original Message -----
From: <jorgen.bergfors at idg.se>
To: <t.hogers at home.nl>; <synth-diy at node12b53.a2000.nl>
Sent: Wednesday, April 05, 2000 8:07 AM
Subject: Re: DIY PCB etching


> >Tried solarium method in the past.
> >Did not get good results on stuf with fine lines (0.25mm).
>
> You must be doing something wrong then. I have done SMD stuff with 0,3 mm
lines. No problem. I can do 8 point text without problem. Actually the
limitation is the printer, which only prints 300 dpi resolution. I can
actually see the jaggies from the printer pixels on the etched board.
> I use a  HP Deskjet 720C printer and print on HPs inkjet transparencies.
>
> /Jorgen
>