DIY PCB etching

[Theo]

Tried solarium method in the past.
Did not get good results on stuf with fine lines (0.25mm).
Longer lighting means less sharp prints.

Theo.

----- Original Message -----
From: <jorgen.bergfors at idg.se>
To: <t.hogers at home.nl>; <synth-diy at node12b53.a2000.nl>
Sent: Tuesday, April 04, 2000 5:50 PM
Subject: Re: DIY PCB etching


>A solarium it not probable to produce good results, however it might work a
>little.

It works perfectly for me every time. I have etched around 25 boards with
it, and all were perfectly usable. I never had to do any touching -up or
repair.
So cut the crap, as you obviously don't know what you're talking about.

/Jorgen