DW8000 VCF

[Paul Maddox]

Dear all,

  I checked my schematic, it is pin 5, this is the 12dB output
and it is not connected, the 24db output is fed back into the
chip (NJM2069) via a cap, so you'd need to put the 4016/66
before this cap.

  Paul

*********************************************************
*   Modulus Synthesiser DIY page ;-				*
*				www.xavax.com/modulus	*
*  Email ;-							*
*	  Paul.Maddox at unilever.com				*
*********************************************************