Panel artwork etc...

[Chris Crosskey]

Hi Folks...
Found a new combination that gives the following desireable results...

Use a plotter and design using a PCB package...1:1 output etc....
Plot in reverse onto translucent draughting film..it gives a matt finish 
and also puts the film over the printout when it's mounted...
Use different layers on the PCB package for different things like text and 
dials etc....allows you to change colours of things... .
Spraymount sticks to powdercoat quite well (the perma-mounrt stuff) and 
doesn't smear the ink if you let it dry slightly first....

Ive got a Digisound layout for the ASM1..it goes onto a 12x9, you will need 
16mm knobs and you need to build a trio of undedicated mixers ..

There's also one for the Oakley TB3030 (TB303/Borg/Devilfish clone) that 
goes onto a 6x9....

It looks good, is repeatable, doesn't cost a lot for one off...

chrisc