Looking for controller build hints..

[Andy Mucho]

> -----Original Message-----
> From: Paul Maddox [mailto:Paul.Maddox at unilever.com]
> Sent: Wednesday, October 27, 1999 11:22 AM
>
>   Easiest way would be to use one ADC, and an analog mux
> to get samples from upto 256 knobs/sliders if you should wish.
> Interfacing to midi is easy (its just serial data, just a funny
> baud rate 31.25Kbaud) and interfacing to something like an
> LCD is easy if you get one with the Hitatchi controller on..
>   As for a CPU, Id use an Atmel 8515, but Im biased, I love
> this chip...

This is going on hold :)

>
>   But Id check out this first ;-
>
> http://www.doepfer.com/db_e.htm
>
>   Is 64 pots enough?

Errr, how silly of me! Now I've looked I remember this box of tricks.. This
may well be up to the job. And that RegelWerk is so perfect..
1 DrehBank and 1 RegelWerk will give me pretty much what I need.
Hehe I'm a happy today.. I'll save the mammoth soldering job for another
time..

Thanks for all the hints though.. I'll still be looking into the possibility
of building my own pot box..

Regards
AndyM