Ring modulators

Michael Lloyd michaellloyd at lucent.com
Tue Nov 16 19:21:25 CET 1999

Jim's idea is what I've used: a bunch of diodes in series with a current
source. Just make sure you don't run out of voltage compliance for the
current source . It's kinda' painful doing the measuring since you have to
move both probes for each measurement, but it works.

(replies to mlloyd1 at enteract.com)

----- Original Message -----
From: Jim Patchell <patchell at teletrac.com>
To: <synth-diy at mailhost.bpa.nl>
Sent: Monday, November 15, 1999 12:50 PM
Subject: Re: Ring modulators


> dependent.  If I was doing it, I would make a setup that had a bunch of
> diodes in it so that they could all be measured at the same time.

More information about the Synth-diy mailing list