Easytrax questions

[macdonald at evenfall.com]

Thanks to everyone who responded to the hole size question.

After doing some more digging for docs, it appears that there is a file
called "standard.etl" which binds the various pads and vias specified in
EasyEdit to a particular tool number and drill size.  This information is
used by EasyPlot when creating a drill file.  I need to do some
experimenting but it looks like I would be able to create (for example) a
custom 62 mil pad with a 35 mil hole instead of the standard 28 mil hole.
It's still not clear to me if "Tool 2" has to be a 28 mil drill, "Tool 3"
has to be 35mil, etc., or if I am free to specify any drill size for a
particular tool number (assuming the PCB house has that drill size I guess).

-Chris MacDonald