[Re: 3046]

[INDRID COLD]

hello all

i always hate to be a harbinger of bad news but i thought the best thing would
be to let you guys know what i was told seeing as we all have uses for the
3046. on a positive note i found an interesting item in the Mouser catalog, a
quad 3906 transistor array, and a quad 2907 array. these seem to be promising
devices for PNP transitor applications such as expo. converters. i am going to
order a few pieces of the 3906 device for use in dual filter unit i am planing
to build in the future. i just checked my 3046 stock and i'm down to 6 pieces
:(. well i'm off, i need to hunt down a pinout for this quad 3906. take care.
Mike 

by the way, is anyone familiar with a 3084. i found one lying around and
couldn't locate it on Harris' site.
indridcold at usa.net
http://www.indridcold.conk.com


Romeo_Fahl at stream.com wrote:


I had luck at Allied. ( www.allied.avnet.com/)  They also had LM3900s,
CA3086s,
etc....






Jim Patchell <patchell at teletrac.com> on 03/30/99 07:38:22 AM
                                                              
                                                              
                                                              
 To:      DIY list <synth-diy at mailhost.bpa.nl>                
                                                              
 cc:                                                          
                                                              
                                                              
                                                              
 Subject: Re: 3046                                            
                                                              








    Yesterday I placed an order with JDR ( http://www.jdr.com ), they only
had 38 devices in stock.  I wanted a 100, and they said that they could get
the rest in a few days.  I sort of figured this would be my life time buy.

    Seems to me that maybe somebody should make up a list of IC's and
transistors that are useful and track their status.  One always like to
assume that the availability of useful parts will continue forever.  All I
can say is that DIY just keeps getting more challenging.  Although, that
just means we need to be more creative.

    -Jim

Ian Fritz wrote:

> Bad news -- I just got this from DigiKey:
>
> >>>>
> Thank you so much for your interest in Digi-Key.    I wanted to let you
> know that we would not
> be able to acquire the CA3046 from Harris.     This particular line is
> discontinued.   You may
> want to contact Harris at
> 800-442-7747.
>
> Please let me know if I may be of further assistance.
>
> Best regards,
>
> Mo
>
> Mo Opsahl
> Mo.opsahl at digikey.com
> Technical Department
> Digi-Key Corp.
> <<<<<
>
>   Ian







____________________________________________________________________
Get free e-mail and a permanent address at http://www.netaddress.com/?N=1