Tom Henry's "Supercontroller" again

[Hcabnivek at aol.com]

Having again looked over the schematic for this "Supercontroller" it seems
that the 4001 is layed out correctly except that the power connections are
reversed.  Careful following of the +5v power traces will lead you to pin 7,
the ground pin. The pcb layout in Polyphone and the one on the web at
http://www.spiritone.com/~8brain/76477.html both have this problem.  Is there
any chance that this thing works anyway? Or is it possible that no one has
ever gotten this pcb to work?  Any ideas?
thanks 
kevin

>>Has anyone built Tom Henry's Supercontroller and if so did you use the
 origional pcb layout that was in Polyphony?  The reason I ask is that in
 looking over that layout I found that the power supply traces that go to a
 4001 NOR seem to be backwards  i.e. pin 14 to ground and pin 7 to +5 v.  More
 to the point, the pcb layout around this chip does not agree with the pin
 designation on the schematic.  
 Has anyone built this module using this pcb layout?  Or, could someone tell
me
 what would happen if you reversed the power connections to a cmos chip.  I
 would expect bad things, but maybe not?<<