Minimoog VCF

[Fraser, Colin J]

> -----Original Message-----
> From: Sean Costello [mailto:costello at seanet.com]
> Sent: 11 March 1999 04:24
> To: Terry Michaels
> Cc: synth
> Subject: Re: Minimoog VCF
> 
> I may try to get an MS-20
> filter working one of these days,

Definately a good idea there - the MS20 filter schematics are on the web,
are 99.9% correct, and it has a very low parts count considering it is a
high and low pass filter!
I built the filter a couple of weeks ago and it sounds great.

Can anyone else confirm if R36 on the MS20 filter (OTA version) should be
8.2k (as R17), and not 3.2k as shown ? (Can you get 3.2k resistors ?) I used
8.2k for both.


Colin f