A few MM boards

[tomg]

I think they are all gone. Thanks guys.

-tg

----------
> From: tomg <vco at mindspring.com>
> To: synth-diy at mailhost.bpa.nl
> Subject: A few MM boards
> Date: Friday, June 25, 1999 5:17 AM
> 
> I had maybe 6 left over from the first run, I was just going to keep
> them but one by one they have all gone to new homes. I picked
> up the over-run and now have 12 more to sell. They are $20 ea.
> shipping included, no-sticker ,get your docs on line. First come
> get 'em. If you asked for one here is your chance.
> 
> Warning! a 3046 must hacked onto the MadMouse. Heater or not for 
> good VCO stability! But they are pretty nice afterwards.
> 
> VCO4 owners if you want a easy expansion route the MM boards have.
> 
> 1  +/-12VDC supply ( not enough for 2 heaters! Unless you add heat sinks)
> 2   VCOs (saw only)
> 1   VCF - MS-20 type, 2 pole (1 section)
> 1   VCA
> 2   AD envelope generators
> 1   VCLFO
> 
> Just leave the MM vcos off the board and you've got a lot of module
> goodies + a power supply. There is about a ton of modification one
> can do to this board.
> 
> http://www.mindspring.com/~vco/madm/title.html
> 
> -tg