A few MM boards

[tomg]

I had maybe 6 left over from the first run, I was just going to keep
them but one by one they have all gone to new homes. I picked
up the over-run and now have 12 more to sell. They are $20 ea.
shipping included, no-sticker ,get your docs on line. First come
get 'em. If you asked for one here is your chance.

Warning! a 3046 must hacked onto the MadMouse. Heater or not for 
good VCO stability! But they are pretty nice afterwards.

VCO4 owners if you want a easy expansion route the MM boards have.

1  +/-12VDC supply ( not enough for 2 heaters! Unless you add heat sinks)
2   VCOs (saw only)
1   VCF - MS-20 type, 2 pole (1 section)
1   VCA
2   AD envelope generators
1   VCLFO

Just leave the MM vcos off the board and you've got a lot of module
goodies + a power supply. There is about a ton of modification one
can do to this board.

http://www.mindspring.com/~vco/madm/title.html

-tg