looking for small, cheap knobs

[tomg]

Tech America has some "Serge" look for $0.72ea (10 up). If you get 50
maybe less. I'm thinking about these myself. 900-2553 page 287.

1/2 at the base 
5/8 high
1/2 deep 1/4 insert.

-tg


> Allied electronics has a lot of cheap little knobs. They're certainly
> nothing special: most are black with metal caps, no rubbery sides,
> certainly "utilitarian", but they get the job done. They have some very
> small ones which fit the bill for you: .5" at the base. 
> 
> They have an online ordering page (I forget the address) but you should
> get their catalog anyway. It's huge and full of useful goodies. (altho on
> the whole I'd rather go with Digikey or Mouser) 
> 
> Andrew
> 
> -| Andrew Schrock | aschrock at cs.brandeis.edu |-
> 
> On Tue, 15 Jun 1999, Hess Hodge wrote:
> 
> > Hello,
> > I'm trying to find a good source for small knobs.  I need around 70 of
> > them.
> > 
> > Specifications:
> > -- 1/4" shaft, round
> > -- .5" diameter at base maximum
> > -- cheap!!!  ;)
> > 
> > I have looked throught the Mouser and Digikey catalogs, but the knobs were
> > either too expensive, or "ugly"... ;)
> > 
> > Any suggestions?
> > 
> > Thanks,
> > Hess
> >