[AH] Tandy RealisticPZM mircophones

[Tom Baldwin]

You might also want to look at the FAQ from rec.audio.pro there are several
articles on "upgrading" this mic.

Tom B.

-----Original Message-----
From: James Husted <jhusted at halcyon.com>
To: P.M. van Nugteren <PMvanNugteren at gmx.net>
Cc: synth-diy at mailhost.bpa.nl <synth-diy at mailhost.bpa.nl>
Date: Wednesday, June 09, 1999 1:27 PM
Subject: Re: [AH] Tandy RealisticPZM mircophones


>You can also cut the 1/4" plug off and the cord is got the wires needed to
>wire it to an XLR for balanced use (also adding +6dB). At least the older
>ones did (I've had mine since they first came out). One of the pro audio
>mags did a side-by-side with it and other Pro PZM mics and it stood up
>extreamly well. Good luck.
>_james
>>I'm looking for a pair of TANDY pressure zone microphones (PZM). They're
>>very cheap about f100,- (Dutch guilders) ($50-60). There should be a
>>TANDY shop in Antwerp, Belgium. The only other info that I have about
>>them is that they tend to give a better S/N ratio when fed by one mono
>>12 V battery, They should give a sound comparable to Shure's PZMs (used
>>with 12V batt)
>
>
>James Husted
>Art Director, Web Master, Symetrix Inc/Lucid Technology
>jhusted at symetrixaudio.com
>jhusted at lucidtechnology.com
>jhusted at halcyon.com
>
>