[AH] Tandy RealisticPZM mircophones

[James Husted]

You can also cut the 1/4" plug off and the cord is got the wires needed to
wire it to an XLR for balanced use (also adding +6dB). At least the older
ones did (I've had mine since they first came out). One of the pro audio
mags did a side-by-side with it and other Pro PZM mics and it stood up
extreamly well. Good luck.
_james
>I'm looking for a pair of TANDY pressure zone microphones (PZM). They're
>very cheap about f100,- (Dutch guilders) ($50-60). There should be a
>TANDY shop in Antwerp, Belgium. The only other info that I have about
>them is that they tend to give a better S/N ratio when fed by one mono
>12 V battery, They should give a sound comparable to Shure's PZMs (used
>with 12V batt)


James Husted
Art Director, Web Master, Symetrix Inc/Lucid Technology
jhusted at symetrixaudio.com
jhusted at lucidtechnology.com
jhusted at halcyon.com