Anyone built the PAIA 9730 yet?

[..,]

i built one last weekend, and was moderately pleased with the results, the
cutoff frequency range is a bit on the low side (even after adjusting the
trimpot) without modulation, and the ar generator generates some nominal
noise on the filter output. it's no serge, but hey, i feel it was worth the
cash and time.


-----Original Message-----
From: Jim Patchell <patchell at teletrac.com>
To: jmw <evening at ulster.net>
Cc: synth-diy <synth-diy at mailhost.bpa.nl>
Date: Friday, July 30, 1999 10:13 AM
Subject: Re: Anyone built the PAIA 9730 yet?


>    I started building mine last saturday.  I should be completing it
tommorrow,
>so, I will let you know.
>
>    -Jim
>
>jmw wrote:
>
>> Hi,
>>
>> I just finished building my 9730 and I was wondering if anyone else out
>> there has completed one.
>>
>> The reason that I ask is that I'm noticing two things that are a bit
strange
>> and would like to see if someone else has noticed them.:
>>
>> 1. The input signal is moderately filtered despite the cutoff being wide
>> open -  passing all frequencies. I know that the unit is supposed to be
>> 16hz-16KHz, but I find it hard to believe that these old, heavy metal
abused
>> ears can hear the difference...
>>
>> 2. the built in AR envelope generator has a very hot signal -
>>
>> I've been a good boy & double checked my work ( maybe I'll triple
check!),
>> read through the instructions - twice. etc.
>>
>> Of course, I'll be calling PAIA tommorow to see if they have any answers,
>> but I figurd I'd check with the list.
>>
>> jmw
>