DIY modular module size

[Jim Patchell]

Antti Huovilainen wrote:

> Hi
>
> I'm building my own modular synth and am wondering what would be a
> "standard" size for modules?

    If you don't plan on mixing with anybody elses, it probably doesn't
matter.  If you are going to say also use Paia modules, you might want
to check out their Frac Rack.

http://209.52.185.39/weblog.htm

    You might also want to use the module shapes for the MOTM modules.

http://www.synthtech.com/

>
> Would it be a really bad idea to use wood for casing of individual
> modules?
>

    I use wood for my cases.  Have never had any problems.

>
> Antti
>
> ******** W A R N I N G ! **************************************
> Linux should not be used by those under the influence of Microsoft.
> May cause dizziness or vertigo. Consult your tech support before
> using Linux. (note--after using Linux, you may notice extreme
> discomfort when using Microsoft. Discontinue use of Microsoft.)
> ************************************** W A R N I N G ! ********

    I like your postscript.