January 1999 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Fri Jan 1 10:50:17 CET 1999
Ending: Sun Jan 31 22:50:05 CET 1999
Messages: 956

• Looking for joysticks...   I Dream In 3D
• Digital DIY synths?   I Dream In 3D
• day job...   I Dream In 3D
• CA3046 exponential converter   <<marjan>>
• AW: VCO-1C   <<marjan>>
• AW: CA3046 exponential converter   <<marjan>>
• VCO-1C #2   <<marjan>>
• AW: CA3046 exponential converter   <<marjan>>
• 3904/3906 tranny specs   <<marjan>>
• Simple sample playback using EPROMs   <<marjan>>
• BA6110 and pcb orders   Karl ALEXANDRE
• PCB layout software   Karl ALEXANDRE
• PCB software   Karl ALEXANDRE
• PCB layout software   Karl ALEXANDRE
• PCB layout software   Karl ALEXANDRE
• SSM2038 - Help   Allan
• Heaviness   Allan
• Designing a VCO/simple alternative to paia Midi2cv8.   Allan
• Filter Design   Allan
• SSM2038 or equivelent   Allan
• day job...   Matthew Allen
• BA6110 and pcb orders   Tony Allgood
• AW: VCO-1C #2   Tony Allgood
• 3340 sync   Tony Allgood
• Moog Bp filter!   Tony Allgood
• day jobs   Tony Allgood
• Mixer schematics   Tony Allgood
• MCS 70 (Memory Controlled Synthesizer)   Tony Allgood
• Pre-distortion Diodes for Moog Ladder Filter   Tony Allgood
• Slightly OT - balanced to unbalanced cables?   Tony Allgood
• New panel arrived   Tony Allgood
• 5PDT/6PDT switches?   Tony Allgood
• Expo conv. heater (tomg et al.)   Tony Allgood
• Opinions: On op amp replacement   Tony Allgood
• Opinions: On op amp replacement   Tony Allgood
• [AH] CV TO MIDI   Tony Allgood
• day job...   Mark Amundson
• Amp schemos....   Mark Amundson
• AW: VCO-1C   Florian Anwander
• Filters?   Florian Anwander
• OT: Roland Space Echo Schematic   Florian Anwander
• AW: Filters?   Florian Anwander
• Sampling and Nyquist/Antialiasing filters   Florian Anwander
• Digital DIY synths?   Florian Anwander
• Dodgy 3340s   Florian Anwander
• AW: VC Phaser using the LM13600   Florian Anwander
• day job...   Florian Anwander
• 606 problems.   Florian Anwander
• quick question   Beszedes Arpad
• [Fwd: Re: quick question]   Beszedes Arpad
• gifs on diy   Beszedes Arpad
• day jobs   Beszedes Arpad
• WEB DIY database (Elektor Vocoder)   Beszedes Arpad
• Heaviness (was Re: Day job)   Beszedes Arpad
• gnuplot ! FOR WINDOWS!!!!   Beszedes Arpad
• Env vco!   BJ
• He   BJ
• ll   BJ
• oo   BJ
• Env vco!   BJ
• Env vco!   BJ
• AW: VCO-1C   BJ
• AW: CA3046 exponential converter   BJ
• Filters?   BJ
• AW: CA3046 exponential converter   BJ
• AW: VCO-1C   BJ
• VCO-1C #2   BJ
• AW: AW: VCO-1C   BJ
• AW: AW: VCO-1C   BJ
• AW: AW: VCO-1C   BJ
• AW: CA3046 exponential converter   BJ
• Serge   BJ
• Serge   BJ
• Test posting   BJ
• CA3046 exponential converter   BJ
• PAIA?   BJ
• The return of the V/F VCO!   BJ
• Digital DIY synths?   BJ
• Digital DIY synths?   BJ
• OT: Roland Space Echo Schematic,   BJ
• DSP source!   BJ
• Digital DIY synths?   BJ
• Strange source for SSM2040 ICs?   BJ
• AW: VC Phaser using the LM13600   BJ
• BJ's 4046 oscillator   BJ
• Bobb de moog! delete if not piano!   BJ
• SSM2040 (400 of them)   BJ
• ODP: Day Jobs!! And deadly behaviour!   BJ
• BJ's 4046 oscillator   BJ
• Moog Bp filter!   BJ
• dayjobs   BJ
• OSCar is up on the net!   BJ
• my ssm2164 quad VCO again   BJ
• Magnus book list!   BJ
• components!   BJ
• 2SA798 - Cheap Dual Matched PNP Pair?   BJ
• day job   BJ
• Oscillator idea come's unstuck   BJ
• Oscillator idea come's unstuck   BJ
• Pre-distortion Diodes for Moog Ladder Filter   BJ
• Oscillator idea come's unstuck   BJ
• AW: PAIA Hex VCA circuit   BJ
• AW: LM 13600 question   BJ
• LM13600 multimode filter!   BJ
• Re-inventing (?) the VC envelope ?   BJ
• Mitsubishi Digital Echo / Delay   BJ
• High-Speed Digital Design -Handbook of Black Magic"   BJ
• XR2207 and XR2209 VCO chips   BJ
• Expo conv. heater (tomg et al.)   BJ
• Audio Op-Amps   BJ
• How to make enclosures! (was: aluminum plates and profiles)   Heiko Bajus
• Front Panels (in Germany, too)   Heiko Bajus
• Opinions: On op amp replacement   Jeff Baker
• Sampling and Nyquist/Antialiasing filters   Duane R Balvage
• day job...   Duane R Balvage
• Synar(star instruments0   Duane R Balvage
• quick question   Plinio Andres Barraza
• Oberheim Schematic Needed   Bernie Bean
• Test equipment Web Site   Bernie Bean
• Filter Design   Bissell, Harry
• Expo conv. heater (tomg et al.)   Bissell, Harry
• A few thoughts on heat tests and heaters   Bissell, Harry
• Opinions: On op amp replacement   Bissell, Harry
• Opinions: On op amp replacement   Bissell, Harry
• Opinions: On op amp replacement   Bissell, Harry
• Opinions: On op amp replacement   Bissell, Harry
• Opinions: On op amp replacement   Bissell, Harry
• strobe lights and tempo   John Blacet
• DIY MIDI Clock-Arpeggiator Clock Convertor?   John Blacet
• info on Panasonic BBD's found   Peter Blackett
• Simple sample playback using EPROMs   Bright Boy
• ODP: Filters   Brigman, Corley
• ODP: Filters   Brigman, Corley
• ODP: Filters   Brigman, Corley
• Opinions: On op amp replacement   Brigman, Corley
• Looking for Juno-106 parts   Jezz Brookes
• Synth-DIY=dead??   Jezz Brookes
• soundcard midi/joystick port adapter question   Jezz Brookes
• Slightly OT - balanced to unbalanced cables?   Jezz Brookes
• Slightly OT - balanced to unbalanced cables?   Jezz Brookes
• MIDI activity LED   Jezz Brookes
• Looking for Korg 700s schems   Jeroen Bruintjes
• gifs on diy   Jeroen Bruintjes
• day job...   Jeroen Bruintjes
• Website help needed! Looking for schematics links   Jeroen Bruintjes
• dayjobs   Jeroen Bruintjes
• Website help needed! Looking for schematics links   Jeroen Bruintjes
• Well, website help implemented   Jeroen Bruintjes
• Update webpage   Jeroen Bruintjes
• day jobs   Buck Buchanan
• 5PDT/6PDT switches?   Buck Buchanan
• "Warm-up time" for Buchla 400?   Buck Buchanan
• XR2207 and XR2209 VCO chips   Buck Buchanan
• Opinions: On op amp replacement   Buck Buchanan
• PCB layout software   Michael Buchstaller
• Paia Midi2CV8 kit in germany ?   Michael Buchstaller
• No PCB layout software!   Michael Buchstaller
• gnuplot ! FOR WINDOWS!!!!   Dave Burraston
• FS:Paia (and other) kits   Michael Clancy
• FS:Paia (and other) kits   Michael Clancy
• gifs on diy   Tony Clark
• day job...   Tony Clark
• PCB layout software   Tony Clark
• Any disadvantages in mounting PCB's upside-down?   Tony Clark
• Expo conv. heater (tomg et al.)   Tony Clark
• Audio Op-Amps   Tony Clark
• voltage reg. Question   David Halliday (Volt Computer)
• day job   David Halliday (Volt Computer)
• DIY Surface Mount Soldering   David Halliday (Volt Computer)
• PCB layout software   David Halliday (Volt Computer)
• HARP project - Ultrasonic US death ray.   David Halliday (Volt Computer)
• HARP project - Ultrasonic US death ray.   David Halliday (Volt Computer)
• Aluminum box enclosures with perpendicular, not tapered sides ?   David Halliday (Volt Computer)
• MCS 70 (Memory Controlled Synthesizer)   Steven Cook
• Serge   Sean Costello
• AW: VCO-1C #2   Sean Costello
• AW: AW: VCO-1C #2   Sean Costello
• Beginner's question   Sean Costello
• Regarding DSP synths...   Sean Costello
• ODP: Filters   Sean Costello
• Filters   Sean Costello
• Heaviness (was Re: Day job)   Sean Costello
• Heaviness (was Re: Day job)   Sean Costello
• Filters   Sean Costello
• Subsonic Death Rays (was Re: day job)   Sean Costello
• "three phase" sig gen?   Sean Costello
• Audio Op-Amps   Sean Costello
• Day job...   Cranium
• Amp schemos....   Chris Crosskey
• day job...   Curtin, Steven D (Steven)
• day job   Martin Czech
• Website help needed! Looking for schematics links   Martin Czech
• gnuplot   Martin Czech
• PCB layout software   Martin Czech
• MODULARS!!??   Martin Czech
• archive update   Martin Czech
• Japanese Dual Transistors   Martin Czech
• gnuplot !   Martin Czech
• sneaking in a CMOS VCO   Martin Czech
• CEM3340 sync results   Martin Czech
• AW: CEM3340 sync results   Martin Czech
• archive : too much work with links   Martin Czech
• noniverting transistor amp   Martin Czech
• gnuplot ! FOR WINDOWS!!!!   Martin Czech
• noniverting transistor amp   Martin Czech
• AW: gnuplot ! FOR WINDOWS!!!!   Martin Czech
• PNP arrays   Martin Czech
• PNP arrays   Martin Czech
• current source measurements   Martin Czech
• vco7c thermal results   Martin Czech
• vco7c thermal results   Martin Czech
• vco7c thermal results   Martin Czech
• vco7c thermal results   Martin Czech
• A few thoughts on heat tests and heaters   Martin Czech
• XR2207 and XR2209 VCO chips   Martin Czech
• Expo conv. heater (tomg et al.)   Martin Czech
• "three phase" sig gen?   Martin Czech
• Expo conv. heater (tomg et al.)   Martin Czech
• Opinions: On op amp replacement   Martin Czech
• Opinions: On op amp replacement   Martin Czech
• Mods for the PAIA Fatman   Gerry Dahl
• Invert ADSR   Gerry Dahl
• Another good DIY catalog   Gerry Dahl
• [AH] CV TO MIDI   Gerry Dahl
• ASM-1   Magnus Danielson
• Env vco!   Magnus Danielson
• Env vco!   Magnus Danielson
• ASM-1 on Album, Cover   Magnus Danielson
• archives   Magnus Danielson
• AW: Don's interpolating scanner   Magnus Danielson
• AW: Don's interpolating scanner   Magnus Danielson
• Digital DIY synths?   Magnus Danielson
• VC Phaser using the LM13600   Magnus Danielson
• Sampling and Nyquist/Antialiasing filters   Magnus Danielson
• Sampling and Nyquist/Antialiasing filters   Magnus Danielson
• Digital DIY synths?   Magnus Danielson
• (OT)Re: Digital DIY synths?   Magnus Danielson
• BJ's 4046 oscillator   Magnus Danielson
• AW: VC Phaser using the LM13600   Magnus Danielson
• Digital DIY synths?   Magnus Danielson
• Digital DIY synths?   Magnus Danielson
• AW: VC Phaser using the LM13600   Magnus Danielson
• BJ's 4046 oscillator   Magnus Danielson
• VC Phaser using the LM13600   Magnus Danielson
• AW: AW: AW: VCO-1C #2   Magnus Danielson
• BJ's 4046 oscillator   Magnus Danielson
• Filters   Magnus Danielson
• Web Site   Magnus Danielson
• Summing node/S+H generator question   Magnus Danielson
• Moog Bp filter!   Magnus Danielson
• Day job   Magnus Danielson
• gnuplot   Magnus Danielson
• ODP: Filters   Magnus Danielson
• day jobs   Magnus Danielson
• WEB DIY database   Magnus Danielson
• sneaking in a CMOS VCO   Magnus Danielson
• day job   Magnus Danielson
• Oscillator idea come's unstuck   Magnus Danielson
• Pre-distortion Diodes for Moog Ladder Filter   Magnus Danielson
• Pre-distortion Diodes for Moog Ladder Filter   Magnus Danielson
• Oscillator idea come's unstuck   Magnus Danielson
• Oscillator idea come's unstuck   Magnus Danielson
• Pre-distortion Diodes for Moog Ladder Filter   Magnus Danielson
• Subsonic Death Rays (was Re: day job)   Magnus Danielson
• AW: PAIA Hex VCA circuit   Magnus Danielson
• AW: PAIA Hex VCA circuit   Magnus Danielson
• HARP project - Ultrasonic US death ray.   Magnus Danielson
• Some JFET thoughts...   Magnus Danielson
• J105   Magnus Danielson
• J105   Magnus Danielson
• High-Speed Digital Design -Handbook of Black Magic"   Magnus Danielson
• vco7c thermal results   Magnus Danielson
• High-Speed Digital Design -Handbook of Black Magic"   Magnus Danielson
• Expo conv. heater (tomg et al.)   Magnus Danielson
• Expo conv. heater (tomg et al.)   Magnus Danielson
• "three phase" sig gen?   Magnus Danielson
• Tony Allgood's VCF PCB - parts list for US supplier?   Kevin Day
• AW: VCO-1C #2   Ingo Debus
• voltage reg. Question   Ingo Debus
• noniverting transistor amp   Ingo Debus
• ODP: Filters   Tom Duff
• Day job   Tom Duff
• Sherman Filterbank service manual?   Brett Duggan
• Mods for the PAIA Fatman   Brett Duggan
• Aluminum box enclosures with perpendicular, not tapered sides?   Brett Duggan
• Any disadvantages in mounting PCB's upside-down?   Brett Duggan
• 5PDT/6PDT switches?   Brett Duggan
• Bulk Pot order   Bruce Duncan
• day job...   Ethan Duni
• day jobs   Ethan Duni
• ODP: Filters   Ethan Duni
• ODP: Filters   Ethan Duni
• ODP: Filters   Ethan Duni
• ODP: Filters   Ethan Duni
• Heaviness (was Re: Day job)   Ethan Duni
• CS-50 Schematics.   James Dunn
• Thomas part numbers   James Dunn
• archives   Claire F.
• gifs on diy   Claire F.
• Beginner's question   Claire F.
• dayjobs   Claire F.
• Website help needed! Looking for schematics links   Claire F.
• UK MM orders?   Martin Fay
• Heaviness (was Re: Day job)   Martin Fay
• midi keyboard source (fwd)   Michael A. Firman
• MEME performance in Chicago   Michael A. Firman
• Dodgy 3340s   Fraser, Colin J
• gifs on diy   Fraser, Colin J
• Dodgy 3340s   Fraser, Colin J
• AW: AW: VCO-1C #2   Fraser, Colin J
• AW: AW: VCO-1C #2   Fraser, Colin J
• 3340 sync   Fraser, Colin J
• Simple sample playback using EPROMs   Fraser, Colin J
• Digital DIY synths and DSP stuff   Fraser, Colin J
• Sequencer microprocessors   Fraser, Colin J
• MCS 70 (Memory Controlled Synthesizer)   Fraser, Colin J
• Oscillator idea come's unstuck   Fraser, Colin J
• Common supply   Fraser, Colin J
• Oscillator idea come's unstuck   Fraser, Colin J
• AW: PAIA Hex VCA circuit   Fraser, Colin J
• CEM3340 sync results   Fraser, Colin J
• Slightly OT - balanced to unbalanced cables?   Fraser, Colin J
• noniverting transistor amp   Fraser, Colin J
• Front Panels   Fraser, Colin J
• Slightly OT - balanced to unbalanced cables?   Fraser, Colin J
• day jobs   Ian Fritz
• Filters   Ian Fritz
• 2N4391/92   Ian Fritz
• J105   Ian Fritz
• KE4859 = NTE467?   Ian Fritz
• J105   Ian Fritz
• Discharge Switches (was: Re: J105 )   Ian Fritz
• strobe lights and tempo   Gez
• Test posting   Guido Goebertus
• PAIA?   Guido Goebertus
• Kits n stuff   Guido Goebertus
• gifs on diy   Guido Goebertus
• PAIA?   Guido Goebertus
• PAIA?   Guido Goebertus
• PAIA?   Guido Goebertus
• PAIA?   Guido Goebertus
• Digital DIY synths?   Guido Goebertus
• WEB DIY database   Guido Goebertus
• Elektor Vocoder/DSP talk   Guido Goebertus
• LM13600 multimode filter!   Guido Goebertus
• day job...   Bob Gonsalves
• Touchpad controllers was Re: ribbon controllers   Bob Gonsalves
• 19 in rack panel sources?   Bob Gonsalves
• HARP project - Ultrasonic US death ray.   Bob Gonsalves
• NPN/PNP Transistor Packages   Dr S Grainger
• Digital DIY synths? Somewhat diverging   Scott Gravenhorst
• FatMan VCOs (Was Re: PAiA?)   Scott Gravenhorst
• Oscillator idea come's unstuck   Scott Gravenhorst
• a diode behaving like a cap   Scott Gravenhorst
• [AH] CV TO MIDI   Scott Gravenhorst
• my ssm2164 quad VCO again   Johan Gustavsson
• Looking for joysticks...   Hugo Haesaert
• question about an instrument   Hugo Haesaert
• A few thoughts on heat tests and heaters   Dave Halliday
• uP programming startup   Dave Halliday
• components in the Netherlands   Maarten Halmans
• Day job   Maarten Halmans
• AW: Common supply   Maarten Halmans
• DJ   Arthur Harrison
• archives   Arthur Harrison
• Looking for joysticks...   Arthur Harrison
• Minimum Parts VCO was VCO-1C   Arthur Harrison
• Digital DIY synths?   Arthur Harrison
• Kits n stuff   Arthur Harrison
• components in the Netherlands   Arthur Harrison
• gifs on diy   Arthur Harrison
• Digital DIY synths?   Arthur Harrison
• Beginner's question   Arthur Harrison
• Soldering from Hell. (was: Re: DSP Stuff)   Arthur Harrison
• my ssm2164 quad VCO again   Arthur Harrison
• PCB layout software   Arthur Harrison
• ribbon controllers   Arthur Harrison
• Common supply   Arthur Harrison
• Common supply   Arthur Harrison
• Common supply   Arthur Harrison
• gifs on diy   Mark Havard-Brown
• day job...   Mark Havard-Brown
• 2N4391/92   Janne Heikkarainen
• 2N4391/92   Janne Heikkarainen
• THE Ultimate Web Site   Mikko Helin
• Filter Design   Mikko Helin
• VST Synth   Mikko Helin
• PCB layout software   Hallgeir Helland
• Oberheim Xpander   Hallgeir Helland
• ribbon controllers   Hallgeir Helland
• Looking for joysticks...   J. Larry Hendry
• Steve's horrible day gig and MOTM   J. Larry Hendry
• PCB software   J. Larry Hendry
• Slightly OT - balanced to unbalanced cables?   J. Larry Hendry
• A source for Joysticks   J. Larry Hendry
• Thomas part numbers   Christian Hofmann
• Common supply   Christian Hofmann
• info on Panasonic BBD's found   Christian Hofmann
• MODULARS!!??   Zsolt Homlokos
• Synth-DIY=dead??   Zsolt Homlokos
• MS 20 PWM??!!   Zsolt Homlokos
• ODP: Day Jobs   Thomas Hudson
• ODP: Day Jobs!! And deadly behaviour!   Thomas Hudson
• Heaviness (was Re: Day job)   Thomas Hudson
• Ignore test   Thomas Hudson
• [Digital_Hell] Re: Touchpad controllers was Re: ribbon controllers   Thomas Hudson
• Ebow   Thomas Hudson
• Looking for joysticks...   James Husted
• Hello All (introduction)   Irish
• (OT)Re: Digital DIY synths?   Irish
• Kits n stuff   Irish
• Kits n stuff   Irish
• gifs on diy   Irish
• DSP Stuff   Irish
• Strange source for SSM2040 ICs?   Irish
• gifs on diy   Irish
• Totally new to CV   Irish
• ODP: Day Jobs!! And deadly behaviour!   Irish
• Day Job...   Irish
• Soldering from Hell. (was: Re: DSP Stuff)   Irish
• Soldering from Hell. (was: Re: DSP Stuff)   Irish
• Easy chip question   Irish
• Common supply   Irish
• Common supply   Irish
• CA3046 exponential converter   Michael B. Irwin
• VC Phaser using the LM13600   Michael B. Irwin
• AW: VC Phaser using the LM13600   Michael B. Irwin
• DIY Surface Mount Soldering   Michael B. Irwin
• Pre-distortion Diodes for Moog Ladder Filter   Michael B. Irwin
• Pre-distortion Diodes for Moog Ladder Filter   Michael B. Irwin
• Pre-distortion Diodes for Moog Ladder Filter   Michael B. Irwin
• Pre-distortion Diodes for Moog Ladder Filter   Michael B. Irwin
• Pre-distortion Diodes for Moog Ladder Filter   Michael B. Irwin
• PNP arrays   Michael B. Irwin
• Expo conv. heater (tomg et al.)   Michael B. Irwin
• ASM-1 on Album, Cover   J.D.McEachin
• Heaviness (was Re: Day job)   J.D.McEachin
• ASM-1   James Jackson
• Digital DIY synths?   James Jackson
• Day Jobs   James Jackson
• Digital Stuff   James Jackson
• DSP Stuff   James Jackson
• gifs on diy   James Jackson
• Filters   James Jackson
• DSP Synth   James Jackson
• EZ Kit Lite   James Jackson
• Filters   James Jackson
• Filters   James Jackson
• Web Site   James Jackson
• ODP: Filters   James Jackson
• PNP arrays   Donald Johnson
• day job...   Jim Johnson
• [OT] Midi via PC serial port   Jim Johnson
• Day job   Neil Johnson
• AW: AW: VCO-1C   Haible Juergen
• AW: AW: VCO-1C   Haible Juergen
• AW: AW: AW: VCO-1C   Haible Juergen
• AW: AW: AW: VCO-1C   Haible Juergen
• AW: BA6110 and pcb orders   Haible Juergen
• AW: AW: CA3046 exponential converter   Haible Juergen
• AW: AW: AW: VCO-1C   Haible Juergen
• AW: Filters?   Haible Juergen
• AW: VC Phaser using the LM13600   Haible Juergen
• AW: AW: VCO-1C #2   Haible Juergen
• gifs on diy   Haible Juergen
• AW: AW: VC Phaser using the LM13600   Haible Juergen
• AW: AW: VC Phaser using the LM13600   Haible Juergen
• AW: AW: VC Phaser using the LM13600   Haible Juergen
• AW: Phase and Delay (was: Phase vs. Delay)   Haible Juergen
• AW: AW: AW: VCO-1C #2   Haible Juergen
• AW: AW: AW: VCO-1C #2   Haible Juergen
• AW: my ssm2164 quad VCO again   Haible Juergen
• AW: MODULARS!!??   Haible Juergen
• AW: Subsonic Death Rays (was Re: day job)   Haible Juergen
• AW: PAIA Hex VCA circuit   Haible Juergen
• AW: MS20 Filter Question   Haible Juergen
• CEM3340 sync results   Haible Juergen
• AW: CEM3340 sync results   Haible Juergen
• AW: Pre-distortion Diodes for Moog Ladder Filter   Haible Juergen
• AW: Common supply   Haible Juergen
• AW: LM 13600 question   Haible Juergen
• AW: AW: Common supply   Haible Juergen
• AW: AW: Common supply   Haible Juergen
• AW: Question about an op-amp (NE5517)   Haible Juergen
• AW: gnuplot ! FOR WINDOWS!!!!   Haible Juergen
• AW: AW: gnuplot ! FOR WINDOWS!!!!   Haible Juergen
• AW: noniverting transistor amp   Haible Juergen
• AW: VCO7b   Haible Juergen
• AW: 5PDT/6PDT switches?   Haible Juergen
• VC Envelope   Haible Juergen
• Synar(star instruments0   Julian
• PCB layout software   KA4HJH
• Sequencer microprocessors   KA4HJH
• uP programming startup   KA4HJH
• 3904/3906 tranny specs   Martin J Keefe
• Digital DIY synths?   Martin J Keefe
• DSP Stuff   Martin J Keefe
• DSP Stuff   Martin J Keefe
• Filters   Martin J Keefe
• day job   Barry L Klein
• Common supply   Barry L Klein
• Wiggins Circlotron   Bill Layer
• Wiggins Circlotron   Bill Layer
• Bulk crack order   Bill Layer
• day job...   Bill Layer
• PAIA?   Bill Layer
• My site is up...   Bill Layer
• HARP project - Ultrasonic US death ray.   Bill Layer
• noniverting transistor amp   Bill Layer
• Slightly OT - balanced to unbalanced cables?   Bill Layer
• A few thoughts on heat tests and heaters   Bill Layer
• A few thoughts on heat tests and heaters   Bill Layer
• day job...   Frank Lemieux
• Looking for joysticks...   List, Christopher
• Digital DIY synths?   List, Christopher
• DSP Stuff   List, Christopher
• dayjobs   List, Christopher
• Subsonic Death Rays - KLF?   List, Christopher
• soundcard midi/joystick port adapter question   List, Christopher
• Front Panels   List, Christopher
• midi keyboard source   Phil Macnutt
• Digest?   Phil Macnutt
• DSP Stuff   Michael Maloney
• DSP Stuff: floating point or fixed point   Michael Maloney
• TI-76477   Per Mattsson
• Day job...   Per Mattsson
• Odyssey VCO problem   Brian McDonald
• Day job   McIntosh, Malcolm
• No PCB layout software!   McIntosh, Malcolm
• PCB layout software!   McIntosh, Malcolm
• XR2207 and XR2209 VCO chips   McIntosh, Malcolm
• OT: Roland Space Echo Schematic   Arturo Mieussens
• OT: Roland Space Echo Schematic   Arturo Mieussens
• Construction notes for ETI MIDI/CV interface   Gary Morgan
• Strange source for SSM2040 ICs?   Gavin Muir
• Strange source for SSM2040 ICs?   Gavin Muir
• Strange source for SSM2040 ICs?   Gavin Muir
• Heaviness (was Re: Day job)   Tim Nowaczyk
• day job   Toby Paddock
• Subsonic Death Rays (was Re: day job)   Toby Paddock
• roland sh-3a question   Peri Pakroo
• PNP arrays   Jim Patchell
• PNP arrays   Jim Patchell
• PNP arrays   Jim Patchell
• XR2207 and XR2209 VCO chips   Jim Patchell
• day job...   David Pattee
• Digest?   Hans Pelleboer
• Expo conv. heater (tomg et al.)   Paul Perry
• Opinions: On op amp replacement   Paul Perry
• "three phase" sig gen?   Paul Perry
• "three phase" sig gen?   Paul Perry
• Audio Op-Amps   Paul Perry
• a diode behaving like a cap   Paul Perry
• Expo conv. heater (tomg et al.)   Paul Perry
• CA3040?   Paul Perry
• soundcard as experimental platform   Paul Perry
• Sick JP-8..help needed   Philip
• Multimoog help (Osc Problem)   Philip
• Synar(star instruments0   Chad Ashley Pry
• M6530 delay IC   Stewart Pye
• Sequencer microprocessors   Stewart Pye
• FS: dead minimoog for $400 Australian   Stewart Pye
• FS: dead minimoog for $400 Australian**SOLD**   Stewart Pye
• PAIA Hex VCA circuit   Stewart Pye
• Mods for the PAIA Fatman   Stewart Pye
• LM 13600 question   Stewart Pye
• question about a roland hs60   Stewart Pye
• noniverting transistor amp   Stewart Pye
• Strange source for SSM2040 ICs?   Quint
• DSP Stuff   Quint
• DSP Stuff   Quint
• Regarding DSP synths...   Quint
• web site annoucement   Quint
• PLEASE remove   Gary R.Bridgwater
• Ultrasonic Death Ray? (was: Subsonic Death Rays)   Michael ROGERS
• vco7c thermal results   Michael ROGERS
• Day job   Gordon Ramsay
• MIDI port, uPD, and FPGA   Rob
• 3904/3906 tranny specs   Rob
• 3904/3906 tranny specs   Rob
• ARP Odyssey AR Hacked   Rob
• Digital DIY synths?   Rob
• DSP Stuff   Rob
• Arp Oddy VCO 2 trubbles..   Rob
• Day Jobs   Rob
• touch interfaces, tact buttons, covers, interfaces, etc..   Rob
• PCB layout software   Rob
• day job...   Rob
• Rubber button supply   Rob
• Rubber button supply   Rob
• Sequencer microprocessors   Rob
• Sequencer microprocessors   Rob
• Buchla Garage Sale!   Rob
• noniverting transistor amp   Rob
• noniverting transistor amp   Rob
• noniverting transistor amp   Rob
• noniverting transistor amp   Rob
• studio 440 "proprietary" floppy drive   Rob
• 5PDT/6PDT switches?   Rob
• studio 440 stuff again   Rob
• A few thoughts on heat tests and heaters   Rob
• a diode behaving like a cap   Rob
• a diode behaving like a cap   Rob
• uP programming startup   Rob
• super cheap PIC chip progger   Rob
• Day Job   Jules Ryckebusch
• Audio Op-Amps   Jules Ryckebusch
• 3904/3906 tranny specs   Rene Schmitz
• 3904/3906 tranny specs   Rene Schmitz
• gifs on diy   Rene Schmitz
• 2SA798 - Cheap Dual Matched PNP Pair?   Rene Schmitz
• Japanese Dual Transistors   Rene Schmitz
• Oscillator idea come's unstuck   Rene Schmitz
• Question about an op-amp (NE5517)   Rene Schmitz
• Discharge Switches (was: Re: J105 )   Rene Schmitz
• A few thoughts on heat tests and heaters   Rene Schmitz
• XR2207 and XR2209 VCO chips   Rene Schmitz
• Opinions: On op amp replacement   Rene Schmitz
• day job...   D. Schouten
• [OT] Midi via PC serial port   D. Schouten
• CA3046 exponential converter   Paul Schreiber
• Great US catalog for tools   Paul Schreiber
• Soldering   Paul Schreiber
• Re-inventing (?) the VC envelope ?   Paul Schreiber
• Re-inventing (?) the VC envelope ?   Paul Schreiber
• Another good DIY catalog   Paul Schreiber
• New MOTM info on site   Paul Schreiber
• Audio Op-Amps   Paul Schreiber
• Strange source for SSM2040 ICs?   Andrew Schrock
• PAIA?   Andrew Schrock
• PAIA?   Andrew Schrock
• day job...   Andrew Schrock
• UK MM orders?   Andrew Schrock
• Web Site   Andrew Schrock
• web site annoucement   Andrew Schrock
• Synth-DIY=dead??   Andrew Schrock
• SubSonic frequency talk...   Andrew Schrock
• HOORAY!   Andrew Schrock
• Digest?   Andrew Schrock
• New panel arrived   Andrew Schrock
• need help making a keyboard (and my vco is stupid.. or maybe I'm stupid)   Andrew Schrock
• [Digital_Hell] question about a roland hs60   Jeff Scroggin
• day job...   Sen!
• voltage reg. Question   James Shearer
• Digital DIY synths?   Troy Sheets
• day job...   Troy Sheets
• Introduction   David Shipman
• Headphone amps   Edu Silva
• Line Levels   Edu Silva
• day job...   Edu Silva
• SH09 service manual   Edu Silva
• SH09 service manual   Edu Silva
• PCB layout software   Edu Silva
• Day job moog   Edu Silva
• Mixer schematics and Rane's site   Edu Silva
• MCS 70 (Memory Controlled Synthesizer)   Edu Silva
• Synth-DIY=dead??   Edu Silva
• MS-20 Mods   Edu Silva
• MCS 70 (Memory Controlled Synthesizer)   Edu Silva
• Subsonic Death Rays (even more OT!)   Edu Silva
• Slightly OT - balanced to unbalanced cables?   Edu Silva
• VCR2N/4N JFET VC resistors   Edu Silva
• PNP arrays   Edu Silva
• What one can find inside a well used PC keyboard!!   Edu Silva
• DIY MIDI Clock-Arpeggiator Clock Convertor?   Simon
• Sequencer microprocessors   Simon
• day job...   Dan Slater
• PAIA Hex VCA circuit   Mark Smart
• AW: PAIA Hex VCA circuit   Mark Smart
• ODP: Looking for joysticks...   Roman Sowa
• ODP: 6-pole switched capacitor filter "Q's" (literally)   Roman Sowa
• ODP: Digital DIY synths?   Roman Sowa
• ODP: Digital DIY synths?   Roman Sowa
• ODP: Digital DIY synths?   Roman Sowa
• ODP: gifs on diy   Roman Sowa
• ODP: Day Jobs   Roman Sowa
• ODP: DSP Stuff   Roman Sowa
• ODP: DSP Stuff   Roman Sowa
• Vermona info needed   Roman Sowa
• ODP: DSP Stuff: floating point or fixed point   Roman Sowa
• ODP: Filters   Roman Sowa
• ODP: Digital DIY synths and DSP stuff   Roman Sowa
• my ssm2164 quad VCO again   Roman Sowa
• day job...   Roman Sowa
• ODP: Easy chip question   Roman Sowa
• ODP: Filters   Roman Sowa
• ODP: Digital DIY synths and DSP stuff... and drums   Roman Sowa
• PCB layout, Filters, SEQ uP   Roman Sowa
• ODP: Another good DIY catalog   Roman Sowa
• ODP: "three phase" sig gen?   Roman Sowa
• 19 in rack panel sources?   John Speth
• Buchla Garage Sale!   Chris Stecker
• "Warm-up time" for Buchla 400?   Chris Stecker
• Day job...   Steve
• KE4859   Debby and Gene Stopp
• KE4859   Debby and Gene Stopp
• Digital DIY synths?   Ben Stuyts
• Sampling and Nyquist/Antialiasing filters   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Sampling and Nyquist/Antialiasing filters   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• components in the Netherlands   Ben Stuyts
• Kits n stuff   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital Stuff   Ben Stuyts
• DSP Stuff   Ben Stuyts
• gifs on diy   Ben Stuyts
• DSP Stuff: floating point or fixed point   Ben Stuyts
• DSP Stuff   Ben Stuyts
• DSP Stuff: computers with builtin DSP's   Ben Stuyts
• gifs on diy   Ben Stuyts
• Filters   Ben Stuyts
• Filters   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• DSP Stuff   Ben Stuyts
• DSP Stuff: floating point or fixed point   Ben Stuyts
• Filters   Ben Stuyts
• Digital DIY synths and DSP stuff... and drums   Ben Stuyts
• Digital DIY synths and DSP stuff... and drums   Ben Stuyts
• Digital DIY synths?   Ben Stuyts
• Filters   Ben Stuyts
• Filters   Ben Stuyts
• Filters   Ben Stuyts
• Filters   Ben Stuyts
• Invert ADSR (Modulus #4)   Roy Tate
• Mitsubishi Digital Echo / Delay   Roy Tate
• Digital DIY synths?   Harvey Devoe Thornburg
• Sampling and Nyquist/Antialiasing filters   Harvey Devoe Thornburg
• Digital DIY synths? Somewhat diverging   Harvey Devoe Thornburg
• DSP Stuff   Harvey Devoe Thornburg
• Tracking bandpass filter   Harvey Devoe Thornburg
• Don's interpolating scanner   Don Tillman
• Don's interpolating scanner   Don Tillman
• AW: Don's interpolating scanner   Don Tillman
• Don's interpolating scanner   Don Tillman
• VC Phaser using the LM13600   Don Tillman
• Phase vs. Delay (was VC Phaser using the LM13600)   Don Tillman
• day job   Don Tillman
• day job   Karl Helmer Torvmark
• OT: Roland Space Echo Schematic   John Tuffen
• day job   John Tuffen
• DIY MIDI Clock-Arpeggiator Clock Convertor?   John Tuffen
• Digital DIY synths?   Peter Ullrich
• Roland JUNO 106 CHIP   Roman Vargas
• CA3046 exponential converter   Steve Varner
• CA3046 exponential converter   Steve Varner
• Vishay tempco info   Steve Varner
• Kits n stuff   Steve Varner
• Beginner's question   Steve Varner
• No PCB layout software! (plus Mac info)   Steve Varner
• THE Ultimate Web Site   Steve Varner
• ribbon controllers   Steve Varner
• KE4859   Steve Varner
• Switching FET (was 4859/4391/4392)   Steve Varner
• Subsonic Death Rays (is now way-OT)   Steve Varner
• midi keyboard source   Steve Varner
• Re-inventing (?) the VC envelope ?   Steve Varner
• KE4859 = NTE467?   Steve Varner
• PNP arrays   Steve Varner
• vco7c thermal results   Steve Varner
• Expo conv. heater (tomg et al.)   Steve Varner
• Expo conv. heater (tomg et al.)   Steve Varner
• Integrating Capacitor   Steve Varner
• VC envelope idea   Joachim Verghese
• gifs on diy   Bauke van der Wal
• Heaviness (was Re: Day job)   Bauke van der Wal
• Subsonic Death Rays ...   Bauke van der Wal
• Synth building kits   Chris Wiitala
• Using Soundblaster 32 as effects device?   Rob & Heather Williams
• Fatman mod to add square wave?   Rob & Heather Williams
• soundcard as experimental platform   Rob & Heather Williams
• components!   J.G. Wong
• EMS Help May be OT for some of you.   J.G. Wong
• day job...   Douglas Wright
• 2SA798 - Cheap Dual Matched PNP Pair?   Minoru Yokoo
• AW: Common supply   Merlin Zener
• Any disadvantages in mounting PCB's upside-down?   Merlin Zener
• 5PDT/6PDT switches?   Merlin Zener
• "three phase" sig gen?   Merlin Zener
• "three phase" sig gen?   Merlin Zener
• strobe lights and tempo   Budweiser [FTS]
• Digital DIY synths?   Budweiser [FTS]
• day job...   Budweiser [FTS]
• Simple sample playback using EPROMs   Budweiser [FTS]
• Simple sample playback using EPROMs   Budweiser [FTS]
• PCB layout software   Budweiser [FTS]
• Sequencer microprocessors   Budweiser [FTS]
• Sequencer microprocessors   Budweiser [FTS]
• Aluminum box enclosures with perpendicular, not tapered sides?   Budweiser [FTS]
• 5PDT/6PDT switches?   Budweiser [FTS]
• 606 problems.   Budweiser [FTS]
• day job...   DCMagnuson at aol.com
• a diode behaving like a cap   DCMagnuson at aol.com
• Kits n stuff   DinedHavoC at aol.com
• Hello AH   DrXex at aol.com
• AW: MODULARS!!??   DrXex at aol.com
• Touchpad controllers was Re: ribbon controllers   DubbleDub at aol.com
• Info needed on the JLcooper MIDInterface i/o   DubbleDub at aol.com
• SSM2040 (400 of them)   Hcabnivek at aol.com
• day jobs   IXQY at aol.com
• Subsonic Death Rays (was Re: day job)   IXQY at aol.com
• Ultrasonic Death Ray? (was: Subsonic Death Rays)   IXQY at aol.com
• Heaviness (was Re: Day job)   JWBarlow at aol.com
• Opinions: On op amp replacement   JWBarlow at aol.com
• Digital poly scan keyboard   LesPaul52 at aol.com
• CA3040?   LesPaul52 at aol.com
• [AH] Odyssey VCO problem   Mintlake at aol.com
• need 80017A vcf/vca and MC5534A waveshaper or equivilent for a hs60   THEKn0TiS at aol.com
• hs 60 vcf/gate in mod questions   THEKn0TiS at aol.com
• hs 60 vcf/gate in mod questions   THEKn0TiS at aol.com
• soundcard midi/joystick port adapter question   THEKn0TiS at aol.com
• n e one got a copy of rebirth 2.0 they want to sell   THEKn0TiS at aol.com
• question about a roland hs60   THEKn0TiS at aol.com
• tr606 trouble   THEKn0TiS at aol.com
• need 2 80017a roland vcf/vca   THEKn0TiS at aol.com
• hs 60 vcf/gate in mod questions   WeAreAs1 at aol.com
• 3904/3906 tranny specs   be053520
• Day Jobs   be053520
• NEW DAY JOB!!!!   be053520
• voltage reg. Question   Reverend bluE
• PCB layout software   Reverend bluE
• question about an instrument   Reverend bluE
• another instrument question   Reverend bluE
• question about transistors.   Reverend bluE
• reversed transistors.   Reverend bluE
• HOORAY!   Reverend bluE
• Question about an op-amp (NE5517)   Reverend bluE
• need help making a keyboard (and my vco is stupid.. or maybe I'm stupid)   Reverend bluE
• Keyboard controller question   Reverend bluE
• Summing node/S+H generator question   halfmast at clubmet.metrobbs.com
• [Digital_Hell] Touchpad controllers was Re: ribbon controllers   The Dark force of dance
• FS/T Stuff...   dmf
• FS/T Stuff... More   dmf
• FS/T Stuff... More (Last time)   dmf
• please remove   Raoul.de.Vries at exact.nl
• Tempco measurements   jorgen.bergfors at idg.se
• Digital DIY synths?   jorgen.bergfors at idg.se
• VC Phaser using the LM13600   jorgen.bergfors at idg.se
• VC Phaser using the LM13600   jorgen.bergfors at idg.se
• VC Phaser using the LM13600   jorgen.bergfors at idg.se
• Wiggins Circlotron   jorgen.bergfors at idg.se
• AW: VC Phaser using the LM13600   jorgen.bergfors at idg.se
• PCB layout software   jorgen.bergfors at idg.se
• PCB layout software   jorgen.bergfors at idg.se
• PCB layout, Filters, SEQ uP   jorgen.bergfors at idg.se
• 2N4391/92   jorgen.bergfors at idg.se
• Common supply   jorgen.bergfors at idg.se
• PCB layout, Art or Craft?   jorgen.bergfors at idg.se
• AN-32   jorgen.bergfors at idg.se
• LM 13600 question   jorgen.bergfors at idg.se
• noniverting transistor amp   jorgen.bergfors at idg.se
• PNP arrays   jorgen.bergfors at idg.se
• vco7c thermal results   jorgen.bergfors at idg.se
• vco7c thermal results   jorgen.bergfors at idg.se
• Expo conv. heater (tomg et al.)   jorgen.bergfors at idg.se
• Opinions: On op amp replacement   jorgen.bergfors at idg.se
• AD: Pay Off Your Home Mortgage Within 2 to 5 Years   newtek at internet-profits.com
• uP programming startup   inman at interpath.com
• sci sixtrack   geoffery francis james
• CV TO MIDI   geoffery francis james
• gifs on diy   jc
• AW: Don's interpolating scanner   jhaible
• AW: CA3046 exponential converter   jhaible
• AW: VCO-1C   jhaible
• circular interpolating scanner   jhaible
• AW: VCO-1C   jhaible
• AW: CA3046 exponential converter   jhaible
• VCO-1C #2   jhaible
• VC Phaser using the LM13600   jhaible
• AW: day job   jhaible
• AW: Re: Strange source for SSM2040 ICs?   jhaible
• Oscillator idea come's unstuck   jhaible
• Oscillator idea come's unstuck   jhaible
• MS-20 Mods   jhaible
• Re-inventing (?) the VC envelope ?   jhaible
• Re-inventing (?) the VC envelope ?   jhaible
• Opinions: On op amp replacement   jhaible
• Opinions: On op amp replacement   jhaible
• Expo conv. heater (tomg et al.)   jhaible
• day job   Ullrich at kapsch.net
• AW: Digital DIY synths?   Ullrich at kapsch.net
• AW: Digital poly scan keyboard   Ullrich at kapsch.net
• re day job   george & lorraine
• Day job moog   george & lorraine
• remove   uros maver
• SH09 service manual   removable at mediaone.net
• Day job...   terry michaels
• Japanese semi data   terry michaels
• 2SA798 - Cheap Dual Matched PNP Pair?   terry michaels
• PNP arrays   terry michaels
• Expo conv. heater (tomg et al.)   terry michaels
• a diode behaving like a cap   terry michaels
• FatMan VCOs (Was Re: PAiA?)   honcho at paia.com
• PNP arrays   patchell
• PNP arrays   patchell
• Day & night job....   peter_cornell
• day job...   lfutten at readysoft.es
• 2SA798 - Cheap Dual Matched PNP Pair?   Romeo_Fahl at stream.com
• MS20 Filter Question   Romeo_Fahl at stream.com
• VCO-1C   tomg
• AW: VCO-1C   tomg
• AW: VCO-1C #2   tomg
• VCO-1C #2   tomg
• VCO-1C #2   tomg
• AW: VCO-1C   tomg
• Minimum Parts VCO was VCO-1C   tomg
• Looking for joysticks...   tomg
• Mad Mouse PCBs for Sale   tomg
• Totally new to CV   tomg
• Digital DIY synths?   tomg
• Digital DIY synths?   tomg
• UK MM orders?   tomg
• Summing node/S+H generator question   tomg
• PCB layout software   tomg
• [OT] Midi via PC serial port   tomg
• DIY Surface Mount Soldering   tomg
• OT: Cringely HAHAHA   tomg
• MM Assembly and Setup Manual   tomg
• Day job   tomg
• Heaviness (was Re: Day job)   tomg
• Heaviness (was Re: Day job)   tomg
• Heaviness   tomg
• Easytrax Resources   tomg
• vcf9a Surge Type SVF   tomg
• CadCam   tomg
• Cadcam 2   tomg
• reversed transistors.   tomg
• AW: PAIA Hex VCA circuit   tomg
• Fw: AW: PAIA Hex VCA circuit   tomg
• AW: PAIA Hex VCA circuit   tomg
• VCO7a   tomg
• VCO7b   tomg
• VCO7b   tomg
• VCO7b   tomg
• vco7c thermal results   tomg
• Fw: VCO7b   tomg
• vco7c thermal results   tomg
• Mad Mouse PCBs   tomg
• Expo conv. heater (tomg et al.)   tomg
• Keyboard controller question   tomg
• Opinions: On op amp replacement   i.c. ultramedia
• Extra Income @ Home! ad   radar at usa7.net
• Subsonic Death Rays (is now way-OT)   M wIlson
• ARP Odyssey AR Hacked   |||| Philip Pilgrim ||||
• tr606 trouble   Kjetil Ødegaard

Last message date: Sun Jan 31 22:50:05 CET 1999
Archived on: Fri Apr 1 13:02:53 CEST 2022

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...