vco7c thermal results

[Michael ROGERS]

>I did a few experiments for the fun of it. I set the vco at 440hz then
>sprayed freeze on the 3046 for 1 sec. freq went up to 582hz . It took it
>about 60secs to recover to 440hz then after a little minor drifting
>stabilizing at 440hz in about 3mins. Then I took my 45w iron and placed it
>in the middle of the 3046 for 30secs. The freq went down to 382hz again it
>took it about 60secs to recover to 440hz stabilizing in about 3mins. So I
>got out the hair dryer full bore and max heat about 6" from the board for
>30secs freq went down to 332hz and took about 5mins to fully recover.

New LFO3 = VCO7 + army surplus flamethrower