vco7c thermal results

[Steve Varner]

...Now put it in the oven on broil for 3 hours...   ;-)

tomg wrote:

> I did a few experiments for the fun of it. I set the vco at 440hz then
> sprayed freeze on the 3046 for 1 sec. freq went up to 582hz . It took it
> about 60secs to recover to 440hz then after a little minor drifting
> stabilizing at 440hz in about 3mins. Then I took my 45w iron and placed it
> in the middle of the 3046 for 30secs. The freq went down to 382hz again it
> took it about 60secs to recover to 440hz stabilizing in about 3mins. So I
> got out the hair dryer full bore and max heat about 6" from the board for
> 30secs freq went down to 332hz and took about 5mins to fully recover.
>
> -tg
> --------------------------------------------------------------------------
> Mad Mouse - PC Board - Analog For Everybody
> http://www.mindspring.com/~vco/madm/mm_order.html
> --------------------------------------------------------------------------