VCO7b

[tomg]

----------
> From: Haible Juergen <Juergen.Haible at nbgm.siemens.de>
> To: DIY <synth-diy at mailhost.bpa.nl>; tomg <vco at mindspring.com>
> Subject: AW: VCO7b
> Date: Monday, January 25, 1999 8:49 AM
> 
> > It was still on the board so I added the 3046 heater. Warms up nicely! 
> > 
> >  http://www.mindspring.com/~vco/misc/pics/vco7b_sd.gif
> > 
> > 
> You must heat the reference transistor, too. Otherwise you
> will have more drift than before.
> (You surely know that, but the picture still shows a 3904 there.)
> 
> JH.

Rearranged things a little. This should be better..

http://www.mindspring.com/~vco/misc/pics/vco7c_sd.gif

-tg