AW: VCO-1C #2

[tomg]

>>And last, not least: How temperature stable is your UJT VCO, Tom ?
>>(not asking about the expo converter, which is a low end compromise
>>no doubt - but the mere UJT / capacitor pair ?) And how does it perform
>>in comparison with a thyristor solution (like Korg) ?

>>JH.

>Like it is NO WAY!... This thing blows with the wind. A bank
>of 36/48 of these things would drive you nuts. Best to re-think
>that divide-down idea.

>-tg

If you really are serious about this. Look at the VCO-3A 
again. I used it in the MM and Mini4. After considering 
your idea a little more, I think this might actually be 
a solution. 

Temp-stability is good. It would still require at least a tempco 
and maybe 3046s if you were going to gang them up.

This is (no offence...really) a pretty nutty idea. Having only 12/16 
CEM3340s in a poly they used a cpu to keep 'em almost in tune, some 
of the time, and those were Curtis chips.  

-tg (I push my tune buttons all the time)