The science of reverb springs

[JWBarlow at aol.com]

In a message dated 2/21/99 3:59:24 PM, will7370 at tao.sou.edu wrote:

>I've played around with them on the bench and I
>guess you cannot insert a signal into them without
>pre-amping it up fairly high, then when it comes out the
>other side it is ready for amplification again.

What I've done in the past is to use the headphone amplifier (those extra ones
that you get as you acquire a bunch of different mixers) to drive the cans and
bring the output to a mic input. Is this a really bad idea?

John B.