Korg MS 20 f->Volt Converter

[Paul Perry]

At 10:38 AM 10/02/99 -0500, Bissell, Harry wrote:

>one).  If your interested I'll try to find the 360 Systems circuit. I had to
>trace it out by hand (with all chip numbers dusted off). Maybe some errors
>but I was able to identify all thr chips from their pinouts (4000 CMOS).

Would certainly appreciate this, i am looking at f to v schemes to get cv out
of a theremin design. The MS20 is kinda OK but I think not as
optimal/elegant as could be.
I think the 360 system with a slew limiter added (with the slew rate
controlled by the 
output CV in some way) might be best.

paul perry (Frostwave P/l) Melbourne Australia