DIY box for adding shuffle to a Sync Signal

[Magnus Danielson]

From: DCMagnuson at aol.com
Subject: Re: DIY box for adding shuffle to a Sync Signal
Date: Tue, 28 Dec 1999 19:01:12 EST

> Here's something to mess with... a friend told me he used a thru-zero flanger 
> set to 100% wet signal to modulate an SMPTE signal coming from a tape deck.  
> He said it added swing to the sequencer.  

OUCH!

I gather that he only used the swinging delay signal, cause otherwise the
SMPTE signal goes broken... swinging the delaying signal is OK, but you can
run into trouble when you do this at an excess since the receiving end migth
not handle quick excursions well.

Cheers,
Magnus