Need fx pedal schemes, esp flangers

WeAreAs1 at aol.com WeAreAs1 at aol.com
Mon Dec 27 20:28:04 CET 1999


In a message dated 12/27/99 10:54:22 AM, you wrote:

<<WeAreAs1 at aol.com wrote:
> On the subject of flangers -
> 
> It's much easier to get a super-wide sweep range out of an analog delay than
> a digital delay.  Most clock-based DDL's only allow about 4 to 1 sweep 
range,
> whereas analog delays can be swept at much higher ratios.  This gives
> flangers a more dramatic sound.  (but it's not so useful for chorus or any
> other type of delay-based effects)

Non-clock-based analog delay chips? Never heard of these. How do they work?>>

Just to clarify, I was referring to digital delays (DDL's), not analog 
delays.  By "clock-based DDL" I meant digital delays that have a hardware 
clock specifically for clocking the delay shift registers, such as the Roland 
SDE3000 or the old DeltaLabs delays.  This is in contrast to many modern 
digital delays which do not have a dedicated hardware clock that controls the 
rate of the shift register.  Examples this would be any of these new 
DSP-based multi-effect units from Lexicon, Alesis, Roland, Yamaha, and pretty 
much everybody else.  Of course, strictly speaking, these units do have a 
clock, but it's the master clock for the DSP, and you're certainly not going 
to be sweeping it with an LFO to get a flange effect!

Michael Bacich



More information about the Synth-diy mailing list