CAM update

[tomg]

They called to say the boards were ready Wednesday. So I hurried
over to pick them up...I could go into a long description of what 
happened but what would be the point? The result would be the 
same. They are remaking the boards on a priority basis and I will
pick up them up Tuesday. I will try to have everything ready so I 
can ship them all on Wednesday. Sorry for the delay, I was really
hoping you would all have them by the 23rd...

If you would like to place a CAM order there are very few of the
following pcbs left. Sorry the rest are sold out for the time being. I
intend to buy the over-runs so when I know how many there are I
will offer them also...there may only be 1 or 2 additional boards
for each type.

http://www.xavax.com/efm/diy-pcb/cam/cam.html

(5) EGFLO1A - Gated ADSR/Trigger AD or AD-LFO
(6) KBD2A      - 1 switch per key keyboard interface,Tri-sq LFO and VCA
(4) RMP1B      - Ring modulator, Tri-sq LFO and Variable gain preamp
(2) VCA5B      - Final VCA and  6x Mixer
(5) VCF1E      - 1P HP/LP VCF and 2P HP/BP/LP VCF w/VCQ
(2) VCF8E      -  Dual MS20 type VCF w/VCQ
(2) VCO3D     -  Dual SAW/SQ VCO w/VCPWM heater/tempco option

Thanks for making this a sucess. I will finish the CAM pages with an
example panels and wiring diagrams. I hope to post PDFs so the panel 
layouts can be printed to full-sheet self-adhesive label stock. 

I intend to take a few weeks off after the 1st. and then do the MadMouse2 
and maybe CAM2. The MadMouse2 will be a 2 board cv-synth offered as 
complete kit in a custom silk-screened enclosure. All components will be
mounted to the boards and then the boards connected with ribbon cable.
No wire-flying!! The raw pcbs wilI also be available.  I hope to price the 
boards in the $30 range and the kit less than $100. I need a vote.  If you
were thinking about buying a MadMouse2 would you rather have a 2sp
rack or a small stomp-box sized synth?

CAM2 will be what's left of the modules and boards for CEMs. Are there
enough people who would like a dual or single 3340 board to add it to the 
list? I intend to do the 3374, 3372, 3320 and 3394+2nd VCO.  Anything
else you guys want?  

-tg  ( the ms20 esp lives!!.....;-)