wind your own tempcos

[Ian Fritz]

Can those be unwound or are they glued in place?  If you could liberate the
wire, then it could be re-wound non-inductively.

  Ian


----- Original Message -----
From: Martin Czech <martin.czech at intermetall.de>
To: <synth-diy at mailhost.bpa.nl>
Sent: Wednesday, December 15, 1999 2:06 AM
Subject: wind your own tempcos


> 50u copper wire is available for reasonable cost.
>
> Do you know these little inductors, most suppliers carry them.
> They are crap, a 63mH has series resistance of 700 Ohm!
> You know where this is going to? Such a little coil should be a
> nice tempco with some parasitice inductance (copper wire).
>
> m.c.
>
>