tr606 tom mods & midi->din

[Janne Heikkarainen]

> I haven't done it but the place to look would be R333 for the Hi Tom. You
> could replace this with a 100ohm resistor and 5k pot in series. *****I
> haven't tried this. No guarantees, but if you have the 100ohm R you
> shouldn't kill the 606. You may need to increase R334 to get the range you
> want. You could do the same for Low tom. The 606 schematic is on the web.
> 
thanks for the info...have to try this out.

> >and whatabout picfree midi to dinsync converters? there is one schem on
> >hyperreal but it uses a 6402 uart and i can't find one anywhere...  
> 
> You won't find an easier way to do it than with a pic. You could build a
> pic programmer AND a MIDI-sync converter for less time and money than it
> would take to build the Uart based MIDI-sync. IMHO of course. Or you could
> buy the Blacet MIDI-sync chip.
> 
yeah this is true.i just found a decent pic programmer for the amiga and
it is pretty simple to build.now where can i find schematics for a pic
midisync circuit?

> Hope this helps
> 
it did :)

.biotek