Sram

[Paul Perry]

At 01:53 AM 23/08/99 PDT, Paul Maddox wrote:

>  Two problems I have found, most seems to be 32K (which is ok) but have 
>seperate address lines for reading/writing and also seem to be PLCC, I would 
>really like to stick with DIL, just so I can vero it easier.
>
My advice is, give up on the DIP & get a plcc socket that mounts on a PCB.
I designed a product around a MC68HC811E2 in DIP.. now the dip isn't made
anymore!

Of course, the PLCC through hole socket may not be Vero spacing..

paul 'what can go wrong now?' perry Melbourne Australia